›› 2013, Vol. 26 ›› Issue (5): 154-.

• 论文 • 上一篇    下一篇

雷达刷丝导电环钯镍合金镀膜技术研究

吴晓霞   

  1. (中国电子科技集团公司第38研究所 工程技术部,安徽 合肥 230031)
  • 出版日期:2013-05-15 发布日期:2013-06-20
  • 作者简介:吴晓霞(1981—),女,工程师。研究方向:表面处理工艺。E-mail:wuxiaoxia114@163.com

Radar Brush Wire Conductive Ring Palladium Nickel Alloy Coating Technology Research

WU Xiaoxia   

  1. (Engineering Division,38thResearch Institute of China Electronic Technology Group Corporation,Hefei 230031,China)
  • Online:2013-05-15 Published:2013-06-20

摘要:

描述了针对雷达刷丝-导电环采用钯镍合金镀膜的技术,对铝青铜材质的导电环刷丝面进行电镀,达到耐磨性钯镍合金膜层结构,以满足产品所需要的耐磨和导电要求。研究了钯镍合金溶液的钯离子浓度参数变化,以及参数变化对刷丝面镀层钯镍百分比含量的影响。结合镀金层对实验结果进行分析,讨论了各种现象出现的原因。

关键词: 钯镍合金, 镀金, 电阻率变化值

Abstract:

Palladium nickel alloy technique is adopted for the radar brush wire conductive ring.Metallization is conducted on aluminum bronze material of conductive ring to wear resistance palladium nickel alloy membrance layer structure,so as to meet the wear-resisting and conductive requirements.The palladium ion concentration parameter change in the palladium nickel alloy solution and its influence on brush wire surface thickness is studied.Combined with the experiment results of gold plated layer,the article analyzes the reasons of various phenomena.

Key words: palladium nickel alloy;gold-plated;resistivity change value

中图分类号: 

  • TQ153.2