微弱信号检测系统设计

›› 2013, Vol. 26 ›› Issue (11): 104-.

微弱信号检测系统设计

王仕元,李强,朱晓兵,陈圣俭

(1.装甲兵工程学院控制工程系,北京 100072;2.中国北方车辆研究所信息中心,北京 100072)

出版日期:2013-11-15 发布日期:2013-11-19
作者简介:王仕元(1973—),男,硕士研究生。研究方向:边界扫描和电路故障诊断。E-mail:wangshiyuanfe@163.com

Design of Weak Signal Detection System

WANG Shiyuan,LI Qiang,ZHU Xiaobing,CHEN Shengjian

(1.Department of Control Engineering,Academy of Armored Force Engineering,Beijing 100072,China;2.Information Center,China North Vehicle Research Institute,Beijing 100072,China)

Online:2013-11-15 Published:2013-11-19

摘要/Abstract

摘要：

针对压力传感器输出信号微弱并带有较大噪声干扰的情况,设计了一种基于互相关检测技术的微弱信号检测系统。系统以变压器式压力传感器为压力信号检测器件,采用单片集成函数信号发生器ICL8038产生正弦波信号,再经功率放大器TDA7294放大后,作为传感器信号的调制信号和互相关检测的解调参考信号,采用平衡调制解调芯片AD630设计锁相放大器电路,通过放大、滤波、整流得到直流信号。仿真和实验验证证明了系统对微弱信号的检测效果理想,适用于强背景噪声下对微弱信号的检测。

关键词: 微弱信号检测, 锁相放大器, 压力传感器, ICL8038, AD630

Abstract:

A weak signal detection system based on the cross-correlation detection technology is designed and implemented to solve the problem that the pressure sensor output signal is weak and usually mixes with noise and interference.Transformer pressure sensor is used as the pressure signal detection device.Generated by the monolithic integration function signal generator ICL8038,and amplified by the power amplifier TDA7294,the sine wave signal is used as the modulation signal of the sensor signal and the demodulated reference signal of cross-correlation detection.The balanced modulator/demodulator AD630 is used to build the lock-in amplifier.After being amplified,filtered and rectified,a DC signal is obtained.Simulations and experiments show that the system has an ideal effect on the detection of weak signal,and is suitable for the detection of weak signals mixed with strong background noise.

Key words: weak signal detection;lock in amplifier;pressure sensor;ICL8038;AD630

中图分类号:

TN911.23

王仕元,李强,朱晓兵,陈圣俭. 微弱信号检测系统设计[J]. , 2013, 26(11): 104-.

WANG Shiyuan,LI Qiang,ZHU Xiaobing,CHEN Shengjian. Design of Weak Signal Detection System[J]. , 2013, 26(11): 104-.

[1]	孙明扬,孟彩茹. 基于压力传感器的人体坐姿识别测试研究[J]. 电子科技, 2021, 34(4): 47-51.
[2]	鲍丙豪,陈亮. 基于Pcap01的MEMS电容压力传感器测量电路设计[J]. 电子科技, 2019, 32(3): 57-60.
[3]	王梦，葛斌，徐明哲，石仝雨. 基于单片机的多通道足底压力采集系统设计[J]. , 2017, 30(9): 30-.
[4]	黄雨濛,戚昊琛,胡智文,张鉴. MEMS电容式压力传感器检测电路比较研究[J]. , 2015, 28(1): 186-.
[5]	司淑平. 基于LabVIEW的混沌微弱信号检测系统设计[J]. , 2013, 26(6): 34-.
[6]	苏鑫, 罗文广, 马超, 吴再群. 一种双相位锁相放大电路设计[J]. , 2012, 25(3): 75-.
[7]	刘玉宾, 丁万山. 基于ARM与有理数滤波的甲烷体积分数监测系统[J]. , 2011, 24(2): 33-.
[8]	刘立. 利用Duffing方程组检测随机相位的正弦信号[J]. , 2011, 24(12): 91-.
[9]	吴再群. 基于锁相放大器的光纤电流互感器研究[J]. , 12, 25(9): 79-.