S7-1200 PLC在伺服电动机位置控制中的应用

doi:10.16180/j.cnki.issn1007-7820.2020.05.013

Abstract

Abstract:

With the improvement of production technology, the motion control module of servo motor requires more precise position control. The SIMATIC S7-1200PLC designed and developed by Siemens has good modern process performance. It is given by pulse interface. The motor’s operational control functions are supported to meet current process requirements and are fully functional. This paper studied the application of SIEMENS S7-1200 PLC in the position control of Panasonic servo motor. This paper firstly explained the wiring steps of Panasonic servo motor A5 series hardware and PLC system, and then controled the displacement motion of servo motor through software program. Finally, the experiment was used to verify the correctness of the program. The results showed that the accuracy of the displacement operation could reach 0.1 mm, which could meet the performance requirements of position control.

Key words: S7-1200 PLC, servo motor, motion control, hardware setting, software configuration, experimental verification

CLC Number:

TP27

FAN Zhenrui. Application of S7-1200 PLC in Position Control of Servo Motor[J].Electronic Science and Technology, 2020, 33(5): 77-81.

Figures/Tables 8

Figure 1.

Fig.2

Figure 3.

Figure 4.

Figure 5.

Figure 6.

Figure 7.

Figure 8.

References 14

[1]	王宝平 . FANUC 0i-TD系统基于伺服电动机主轴控制功能的实现[J].制造技术与机床, 2018(5):168-170.
	Wang Baoping . Implementation of FANUC 0i-TD system based on servo motor spindle control function[J].Manufacturing Technology and Machine Tools, 2018(5):168-170.
[2]	翁振斌, 张梦琳 . 永磁同步电动机伺服控制系统的硬件设计[J].丝网印刷, 2017(5):36-40.
	Weng Zhenbin, Zhang Menglin . Hardware design of servo control system for permanent magnet synchronous motor[J].Screen Printing, 2017(5):36-40.
[3]	林建洪, 方丽芳 . 一种新型永磁同步电动机伺服控制系统设计[J].河南城建学院学报, 2017(2):5-9.
	Lin Jianhong, Fang Lifang . Design of a novel servo control system for permanent magnet synchronous motor[J].Journal of Henan Urban Construction Institute, 2017(2):5-9.
[4]	周大刚, 武刚, 宋江 . 利用变频器代替伺服驱动模块控制主轴电动机[J].金属加工(冷加工), 2017(1):109-110.
	Zhou Dagang, Wu Gang, Song Jiang . Using a frequency converter instead of a servo drive module to control the spindle motor[J].Metal Processing(Cold Working), 2017(1):109-110.
[5]	段宝利, 徐晓东 . 运动控制中伺服电机选型需求分析[J].自动化与仪器仪表, 2017(2):70-73.
	Duan Baoli, Xu Xiaodong . Analysis of demand selection of servo motors in motion control[J].Journal of Automation & Instrumentation, 2017(2):70-73.
[6]	张军 . 伺服电机在提升机床定位精度中的设计与应用[J].内燃机与配件, 2018(13):111-113.
	Zhang Jun . Design and application of servo motor in improving machine tool positioning accuracy[J].Internal Combustion Engines & Parts, 2018(13):111-113.
[7]	高会恩, 初亮, 郭建华 , 等. 基于电动伺服系统的制动能量回收控制策略研究[J].农业机械学报, 2017(7):350-357.
	Gao Huien, Chu Liang, Guo Jianhua , et al. Research on brake energy recovery control strategy based on electric servo system[J].Transactions of the Chinese Society of Agricultural Machinery, 2017(7):350-357.
[8]	何俊, 邓成军 . 基于LabVIEW的数字伺服原理实验系统[J].实验室研究与探索, 2017(9):58-62.
	He Jun, Deng Chengjun . Experimental system of digital servo principle based on LabVIEW[J].Laboratory Research and Exploration, 2017(9):58-62.
[9]	姚松坡, 陈机林, 刘超 , 等. 基于DSP+FPGA的电动伺服加载系统设计[J].电气传动, 2017(6):89-93.
	Yao Songpo, Chen Jilin, Liu Chao , et al. Design of electric servo loading system based on DSP+FPGA[J].Electric Drive, 2017(6):89-93.
[10]	徐建刚, 石广田, 王思远 . 某型分布控制的电动伺服机构设计研究[J].机械研究与应用, 2017(1):89-93.
	Xu Jiangang, Shi Guangtian, Wang Siyuan . Design of electric servo mechanism for a type of distributed control[J].Mechanical Research & Application, 2017(1):89-93.
[11]	程永强 . 基于PLC和伺服的砌块码垛机控制系统设计[J]. 通化师范学院学报, 2018,39(12):7-11.
	Cheng Yongqiang . Design of block and palletizer control system based on PLC and servo[J]. Journal of Tonghua Teachers College, 2018,39(12):7-11.
[12]	陈金学, 赵飞, 朱志能 , 等. 基于Ansys和Motor-CAD对交流伺服电动机性能的研究[J]. 电机与控制应用, 2018,45(7):54-58.
	Chen Jinxue, Zhao Fei, Zhu Zhineng , et al. Research on performance of AC servo motor based on Ansys and Motor-CAD[J]. Electrical and Control Application, 2018,45(7):54-58.
[13]	祝玉勇 . 西门子PLC组网技术的研究与应用[J]. 中国设备工程, 2017(20):39-42.
	Zhu Yuyong . Research and application of siemens PLC network technology[J]. China Equipment Engineering, 2017(20):39-42.
[14]	丁超 . 西门子PLC控制网络的配置策略与应用探析[J].数字技术与应用, 2017(3):21-25.
	Ding Chao . Analysis of configuration strategy and application of siemens PLC control network[J]. Digital Technology & Applications, 2017(3):21-25.

Application of S7-1200 PLC in Position Control of Servo Motor

RichHTML

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 8

References 14

Related Articles 8

Metrics

Comments

Recommended 10

[1]	ZHOU Hongkun. Design and Implementation of the Multi Sensor Integrated Navigation System for MiniUAV [J]. , 2016, 29(8): 10-.
[2]	ZHU Zhongzhen，ZHANG Zhendong. Three Dimension Platform Design Based on LabVIEW and Its Application in Wheel Speed Detection [J]. , 2016, 29(6): 167-.
[3]	LI Jianhua，ZHANG Renjie，LIU Hu，LI Xiaqing. The Design of Open Servo Control System Based on DSP and PowerPC [J]. , 2016, 29(11): 28-.
[4]	YANG Jun,WENG Guohua,YUE Jian,FAN Zhihong. Design of the Three-dimensional Pitot Speed Measuring System Based on Servo Motor [J]. , 2015, 28(9): 152-.
[5]	ZHANG Chang,TANG Lijun,WU Dingxiang,HE Huiyong,SI Niu,LI Tao. Trajectory Analysis of Six Degrees of the Freedom Manipulator in Refrigerator Energy Detection [J]. , 2014, 27(4): 41-.
[6]	ZHOU Shi-Qun, WANG Ping. Research on Motion Control System Based on PCI-1240 [J]. , 2013, 26(2): 87-.
[7]	TIAN Qi, LI Qi, YAO Peng, ZHAO Yuan. Motion Control of Omni-directional Robot Based on Fuzzy PID Control [J]. , 2011, 24(9): 131-.
[8]	ZHOU Quan, BAI Guo-Zhen, XIONG You, CAO Peng-Kun. Research on CAM Curve Based on Siemens SIMOTION D425 Motion Control System [J]. , 2011, 24(10): 96-.