嵌入式组态触摸屏与非标准通讯规约设备的一种通讯方法

doi:10.16180/j.cnki.issn1007-7820.2019.10.014

电子科技 ›› 2019, Vol. 32 ›› Issue (10): 70-74.doi: 10.16180/j.cnki.issn1007-7820.2019.10.014

嵌入式组态触摸屏与非标准通讯规约设备的一种通讯方法

丁来伟,董彪,李鹏程,杜海江

中国农业大学信息与电气工程学院,北京 100083

收稿日期:2018-10-15 出版日期:2019-10-15 发布日期:2019-10-29
作者简介:丁来伟(1991-),男,硕士研究生。研究方向:电力电子技术应用。|董彪(1991-),男,硕士研究生。研究方向:电力电子技术及应用。
基金资助:
中国电力科学研究院科研立项

A Method of Communication Between Embedded Configuration Touch Screen and Non-standard Communication Protocol Equipment

DING Laiwei,DONG Biao,LI Pengcheng,DU Haijiang

College of Information and Electrical Engineering,China Agricultural University,Beijing 100083,China

Received:2018-10-15 Online:2019-10-15 Published:2019-10-29
Supported by:
China Electric Power Research Institute Scientific Research Project

摘要/Abstract

摘要：

目前很多电力电子装置采用非标准通讯规约,以至其无法直接与上位机通讯。文中介绍了一种嵌入式组态触摸屏与非标准通讯规约设备之间通讯的实现方法。该方法使用嵌入式组态软件提供的脚本驱动开发工具,编写非标准通讯规约的设备驱动,并将此设备驱动加载到嵌入式组态软件中,实现了两者之间的通讯。实际测试结果显示,使用该设备驱动,嵌入式组态触摸屏与非标准通讯规约设备之间通讯正常,遥测值读取准确,并且可以按照设定值定时刷新,遥调指令下发正确,从机设备可按照指令正确改变工作模式。

关键词: 电力电子装置, 非标准通讯规约, 嵌入式组态触摸屏, 组态软件, 脚本驱动开发工具, 设备驱动

Abstract:

Many power electronic devices adopt non-standard communication protocol, making them unable to communicate with the upper machine directly. This paper introduced a method to solve the communication problem between embedded configuration touch screen and non-standard communication protocol equipment. The method uses the script-driven development tool provided by the embedded configuration software to write the device driver of the non-standard communication protocol. Then the device driver was loaded into the embedded configuration software to realize the communication. The test results showed that the communication between embedded configuration touch screen and non-standard communication protocol equipment was correct by using the device driver, and the sampling values received by embedded configuration touch screen were right and refreshed correctly. At the same time, the instruction was sent to equipment correctly and the equipment could change its mode following the instruction.

Key words: power electronic equipment, non-standard communication protocol, embedded configuration touch screen, configuration software, script-driven development tool, device driver

中图分类号:

TN919

丁来伟,董彪,李鹏程,杜海江. 嵌入式组态触摸屏与非标准通讯规约设备的一种通讯方法[J]. 电子科技, 2019, 32(10): 70-74.

DING Laiwei,DONG Biao,LI Pengcheng,DU Haijiang. A Method of Communication Between Embedded Configuration Touch Screen and Non-standard Communication Protocol Equipment[J]. Electronic Science and Technology, 2019, 32(10): 70-74.

图/表 6

图1

图2

图3

图4

图5

图6

参考文献 16

[1]	潘维, 朱小杰 . 基于PLC与组态软件的SCADA配电监控系统的设计[J]. 电气时代, 2016(1):94-95.
	Pan Wei, Zhu Xiaojie . Design of SCADA distribution monitoring system based on PLC and configuration software[J]. Electric Age, 2016(1):94-95.
[2]	王雨峰, 李瑞明, 陈先勇 , 等. 变电站通信管理机Modbus规约通用接口实现[J]. 电工技术, 2018(1):77-79.
	Wang Yufeng, Li Ruiming, Chen Xianyong , et al. Implementation of Modbus protocol general interface for substation communication manager[J]. Electric Engineering, 2018(1):77-79.
[3]	孙超 . 工业组态软件接入非标准通讯协议组件的实现[J]. 电子科技, 2013,26(10):13-17.
	Sun Chao . Implementation of industrial configuration software access to non-standard protocol components[J]. Electronic Science and Technology, 2013,26(10):1317.
[4]	李贺斌 . 监控组态软件中设备驱动程序开发平台的研究与实现[D]. 秦皇岛:燕山大学, 2006.
	Li Hebin . Research and development of device driver developing flat in the configuration software[D]. Qinhuangdao:Yanshan University, 2006.
[5]	杨毅 . 基于嵌入式系统的组态软件研究[D]. 哈尔滨:哈尔滨理工大学, 2012.
	Yang Yi . Research on configuration software based on embedded system[D]. Harbin:Harbin University of Science and Technology, 2012.
[6]	欧振国, 程汉湘, 林桂龙 , 等. 基于Modbus RTU协议的磁控电抗器远程监控系统[J]. 电测与仪表, 2014,51(4):57-58.
	Ou Zhenguo, Cheng Hanxiang, Lin Guilong , et al. Remote monitoring system of magnetic controlled reactor based on Modbus RTU protocol[J]. Electrical Measurement & Instrumentation, 2014,51(4):57-58.
[7]	方蕾 . 电力系统远动规约机器相互转换的研究与实现[D]. 武汉:武汉大学, 2004.
	Fang Lei . Research and realization of remote communication protocols in power system and conversions among them[D]. Wuhan:Wuhan University, 2004.
[8]	巫钟兴阿辽沙·叶, 郑安刚 , 等. 基于面向对象互操作技术的用电信息采集系统通讯协议设计[J]. 电测与仪表, 2016,53(24):69-70.
	Wu Zhongxing, Aliaosha Ye, Zheng Angang , et al. Communication protocol design of electricity information acquisition system based on object-oriented technology[J]. Electrical Measurement & Instrumentation, 2016,53(24):69-70.
[9]	林品, 袁红兵, 叶舒沁 . M_BUS通信协议的测试软件开发[J]. 电测与仪表, 2016,53(24):69-70.
	Lin Pin, Yuan Hongbing, Ye Shuqin . Development of test application for M_BUS communication logo[J]. Electrical Measurement & Instrumentation, 2016,53(24):69-70.
[10]	张晓萌 . 基于嵌入式的规约转换通讯管理机系统的设计与实现[D]. 昆明:昆明理工大学, 2012.
	Zhang Xiaomeng . Design and realization of protocol conversion communication manager system based on the embedded[D]. Kunming:Kunming University of Science and Technology, 2012.
[11]	吴鹏举 . 光伏并网通讯管理机的设计与实现[D]. 北京:北京交通大学, 2013.
	Wu Pengju . The research and implementation of communication manager for photovoltaic grid-connected system[D]. Beijing:Beijing Jiaotong University, 2013.
[12]	周浩 . 基于MCGS的变电站监控系统开发与设计[J]. 电子科技, 2016,29(11):105-108.
	Zhou Hao . Design and development of substation monitoring system based on MCGS[J]. Electronic Science and Technology, 2016,29(11):105-108.
[13]	商立群, 吕斗牛 . 基于MCGS的变电站电气系统仿真设计[J]. 电力系统保护与控制, 2010,38(3):115-119.
	Shang Liqun, Lv Douniu . Simulation design of substation electrical system based on MCGS[J]. Power System Protection and Control, 2010,38(3):115-119.
[14]	刘小春 . 基于MCGS和PLC的电机运行参数监控系统设计[J]. 自动化技术与应用, 2010,28(9):74-75 .
	Liu Xiaochun . The monitor system design of motor operating parameters based on MCGS and PLC[J]. Techniques of Automation and Applications, 2010,28(9):74-75.
[15]	母才莘 . 基于ModBusRTU协议的MCGS应用系统与单片机通信设计[J]. 自动化应用, 2017(7):49-50.
	Mu Caishen . MCGS application system and MCU communication design based on ModBusRTU protocol[J]. Automation Application, 2017(7):49-50.
[16]	杜海江, 李玉凯 . 小型嵌入式系统的分析方法-IFSM[J]. 单片机与嵌入式系统应用, 2006,6(4):17-19.
	Du Haijiang, Li Yukai . An analysis method of small embedded system-IFSM[J]. Microcontrollers & Embedded Systems, 2006,6(4):17-19.

嵌入式组态触摸屏与非标准通讯规约设备的一种通讯方法

A Method of Communication Between Embedded Configuration Touch Screen and Non-standard Communication Protocol Equipment

RichHTML

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

图/表 6

参考文献 16

相关文章 7

Metrics

本文评价

推荐阅读 10

[1]	朱恩亮,赵腊才,茹伟,胡宇凡. Linux环境下USB设备驱动程序设计[J]. , 2016, 29(1): 108-.
[2]	胥霜霞,周永刚. 嵌入式Linux下Z85C30芯片设备驱动程序设计[J]. , 2014, 27(5): 116-.
[3]	刘洋, 黄晋英. L3G4200D三轴数字陀螺仪在Linux下的I²C驱动设计[J]. , 2014, 27(2): 127-.
[4]	田凡顺,王菌. 网际组态软件在配电系统在线监测中的应用[J]. , 2014, 27(10): 22-.
[5]	杨阳. 基于WebAccess的智能区域用电服务平台设计[J]. , 2013, 26(9): 157-.
[6]	孙超. 工业组态软件接入非标准通信协议组件的实现[J]. , 2013, 26(10): 13-.
[7]	马旭. 基于MPC8313E和FPGA的双口RAM驱动开发[J]. , 2013, 26(1): 110-.