基于DSP的变电站综合自动化控制系统研究

doi:10.16180/j.cnki.issn1007-7820.2020.09.013

摘要/Abstract

摘要：

传统变电站的自动化系统多采用单片机作为其内部核心处理器,该系统不仅功能简单且对复杂问题的处理能力较差。针对上述问题,文中开发了一套基于DSP的变电站综合自动化控制系统。该系统通过DSP结合通信、计算机等技术对采集到的数据进行分析处理,实现对变电站设备实时运行状态的监视、测量、控制及协调。实验与测试结果表明,该自动化系统能够较好地完成对变电站内二次设备的自动监测和控制等功能,显著提高了站内各电气设备间数据信息的传递与共享效率。

关键词: 数字信号处理, A/D转换, 测控及保护单元, 通信网络, 自动化控制

Abstract:

Traditional substation automation system mostly uses single-chip computer as its internal core processor. This system not only has simple functions, but also has poor ability to deal with complex problems. In order to solve the above problems, a set of substation integrated automation control system based on DSP is developed in this paper. The system can monitor, measure, controls and coordinate the real-time operation status of substation equipment by analyzing and processing the collected data by DSP combined with communication and computer technology. Experiments and test results show that the automation system can better complete the functions of automatic monitoring and control of secondary equipment in substation, and significantly improves the efficiency of data transmission and sharing among electrical equipment in substation.

Key words: digital signal processing, A/D conversion, measurement and control and protection unit, communication network, automatic control

中图分类号:

TP273

陈贵州. 基于DSP的变电站综合自动化控制系统研究[J]. 电子科技, 2020, 33(9): 75-78.

CHEN Guizhou. Research on Substation Integrated Automation Control System Based on DSP[J]. Electronic Science and Technology, 2020, 33(9): 75-78.

图/表 7

图1

图2

图3

图4

表1

表2

表3

参考文献 16

[1]	金钊, 周志宇. 综合自动化变电站向数字化变电站发展浅析[J]. 电子设计工程, 2012,20(22):144-148.
	Jing Zhao, Zhou Zhiyu. Shallow analysis the development of comprehensive automatic electric substatlon to digitized electric substation[J]. Electronic Design Engineering, 2012,20(22):144-148.
[2]	徐峰. 冀北电网500kV变电站"调控一体"自动化系统建设的研究[D]. 北京:华北电力大学, 2017.
	Xu Feng. Research on the construction of automation system of "integration of regulation and control" for 500 kV substations in Hebei north power grid[D]. Beijing:North China Electric Power University, 2017.
[3]	白东亚, 朱利锋, 王小林. 220kV综合自动化变电站防误逻辑验收探讨[J]. 浙江电力, 2011,30(6):19-23.
	Bai Yadong, Zhu Lifeng, Wang Xiaolin. Exploration on anti-misoperation logic acceptance for 220 kV comprehensive automated substation[J]. Zhejiang Electric Power, 2011,30(6):19-23.
[4]	殷培峰, 张婧瑜. 基于MCGS的变电站自动化监控系统设计[J]. 工业仪表与自动化装置, 2014(6):30-33.
	Yin Peifeng, Zhang Jingyu. Design of the substation automation monitoring and control system based on MCGS[J]. Industrial Instrumentation & Automation, 2014(6):30-33.
[5]	牛潇. 一种基于DSP的矿用变压器继电保护装置改造研究[D]. 太原:中北大学, 2011.
	Niu Xiao. A research of mining powertransformer's protective relaying equipment based on DSP[D]. Taiyuan:Zhongbei University, 2011.
[6]	范俊锋. 基于DSP的测试系统的设计与开发[D]. 西安:西安电子科技大学, 2013.
	Fan Junfeng. Design and development of testing system based on DSP[D]. Xi’an:Xidian University, 2013.
[7]	戎宏娜, 尹育新. 基于DSP的变电站自动化监控系统的研究[J]. 电源技术, 2016,40(4):910-911.
	Rong Hongna, Yin Yuxin. Research on substation automation monitoring system based on DSP[J]. Power Supply Technology, 2016,40(4):910-911.
[8]	李永锋. 35 kV变电站综合自动化后台监控系统设计与实现[J]. 电子设计工程, 2015,23(7):46-49.
	Li Yongfeng. Design and realization of integrated automation system for 35 kV substation[J]. Electronic Design Engineering, 2015,23(7):46-49.
[9]	郭智慧. 综自变电站继电保护二次回路的检测设计[D]. 北京:华北电力大学, 2015.
	Guo Zhihui. Comprehensive design of secondary circuit of relay protection in substation[D]. Beijing:North China Electric Power University, 2015.
[10]	姚文昊. 抚州500kV变电站综合自动化系统典型动作分析与无人值班模式下的优化[D]. 南昌:南昌大学, 2014.
	Yao Wenhao. Typical action analysis and optimization of unattended mode for integrated automation system of Fuzhou 500 kV substation[D]. Nanchang:Nanchang University, 2014.
[11]	吴新保. 变电站一体化电源在线监控系统设计与实现[D]. 成都:电子科技大学, 2017.
	Wu Xinbao. Design and implementation of on line monitoring system for integrated power supply in substation[D]. Chengdu:University of Electronic Science and Technology of China, 2017.
[12]	刘曦, 戴瑞海, 陈磊. 110kV常规变电站智能化改造模式的探讨[J]. 浙江电力, 2012,31(1):14-17,27.
	Liu Xi, Dai Ruihai, Chen Lei. Exploration on intellectualization mode of 110 kV conventional substation[J]. Zhejiang Electric Power, 2012,31(1):14-17,27.
[13]	魏杰. 智能化变电站继电保护系统工程调试的相关研究[D]. 南昌:南昌大学, 2016.
	Wei Jie. Relevant research on engineering debugging of relay protection system in intelligent substation[D]. Nanchang:Nanchang University, 2016.
[14]	黄益庄. 智能变电站是变电站综合自动化的发展目标[J]. 电力系统保护与控制, 2013,41(2):45-48. doi: 10.7667/j.issn.1674-3415.2013.02.007
	Huang Yizhuang. Smart substation is the further objective of SAS[J]. Power System Protection and Control, 2013,41(2):45-48. doi: 10.7667/j.issn.1674-3415.2013.02.007
[15]	王琳, 权宪军, 刘海波, 等. 智能变电站自动化系统一体化技术探讨[J]. 供用电, 2016,33(7):61-65,43.
	Wang Lin, Quan Xianjun, Liu Haibo, et al. An overview of the research situation of DC distribution network[J]. Distribution & Utilization, 2016,33(7):61-65,43.
[16]	吴世龙. 建筑66 kV变电站综合自动化系统的设计[D]. 沈阳:东北大学, 2012.
	Wu Shilong. Design of integrated automation system for building 66 kV substation[D]. Shenyang:Northeast University, 2012.

输入电压/V	电压通道	实测值/V	实测误差/%	结论
120	U_A	120.018	0.015	正常
	U_B	120.044	0.037
	U_C	120.031	0.026
80	U_A	80.052	0.065	正常
	U_B	80.026	0.035
	U_C	80.007	0.008
40	U_A	39.914	-0.215	正常
	U_B	39.946	-0.135
	U_C	39.983	-0.043

输入电流/A	电流通道	实测值/A	实测误差/%	结论
6	I_A	5.995	-0.080	正常
	I_B	5.997	-0.050
	I_C	5.993	-0.116
4	I_A	3.998	-0.050
	I_B	3.996	-0.100
	I_C	3.995	-0.125
2	I_A	1.998	-0.100	正常
	I_B	1.999	-0.050
	I_C	1.996	-0.200

项目		技术要求	分析结果	结论
快速瞬变脉冲	遥信	变位20次	显示正确	正常
快速瞬变脉冲	遥控	遥控20次	动作正确	正常
浪涌干扰	遥信	变位20次	显示正确	正常
浪涌干扰	遥控	遥控20次	动作正确	正常
高频干扰	遥信	变位20次	显示正确	正常
高频干扰	遥控	遥控20次	动作正确	正常