以仪表结构为先验特征的指针式仪表图像识别

›› 2013, Vol. 26 ›› Issue (10): 10-.

以仪表结构为先验特征的指针式仪表图像识别

倪刚,闫斌

(电子科技大学自动化工程学院,四川成都 611731)

出版日期:2013-10-15 发布日期:2013-10-23
作者简介:倪刚(1986—),男,硕士研究生。研究方向:嵌入式图像识别技术。E-mail:nigang_apply@yahoo.cn。闫斌(1974—),男,博士,讲师。研究方向:模式识别与智能系统。

Pointer Instrument Image Recognition Based on Priori Characteristics of Instrument Structure

NI Gang,YAN Bin

(School of Automation engineering,University of Electronic Science and Technology of China,Chengdu 611731,China)

Online:2013-10-15 Published:2013-10-23

摘要/Abstract

摘要：

在指针式仪表图像识别方法中,为克服的指针定位易受干扰的问题,文中基于Canny边缘算子和Hough直线检测,提出了一种以表盘半径和指针的旋转中心作为先验特征的指针定位算法。首先以旋转中心为中点,表盘直径为边长,提取正方形的感兴趣区域以减小Canny算子的作用时间;其次将Hough变换后的所有直线与结构特征进行比较,剔除不满足距离和位置条件的干扰直线;最终结合Canny边缘算子特点,分析并修正数值计算的误差。

关键词: 指针式仪表, 结构特征, Canny边缘算子, Hough直线检测

Abstract:

In view of the fact that the pointer positioning is prone to interference by pointer instrument image recognition method,an improved pointer algorithm is proposed based on Canny edge operator and Hough line detection with the center of rotation and the radius of the dial as priori characteristics.With the center of rotation as the midpoint and the dial diameter as the side length,the square region of interest is extracted in order to reduce the duration of action of the Canny operator,followed by a comparison between all the straight lines after the Hough transform and structural characteristics to exclude the lines that do not meet the distance and position requirements.Finally,based on the Canny edge operator characteristics,the error of numerical calculation are analyzed and corrected.

Key words: pointer meter;structure characteristics;Canny edge;Hough line transform

中图分类号:

TP391.41

倪刚,闫斌. 以仪表结构为先验特征的指针式仪表图像识别[J]. , 2013, 26(10): 10-.

NI Gang,YAN Bin. Pointer Instrument Image Recognition Based on Priori Characteristics of Instrument Structure[J]. , 2013, 26(10): 10-.

[1]	雷稳，王珍珍，马辉辉，罗威，郑宁. 基于ADSP-BF609的指针式仪表识别系统设计[J]. , 2017, 30(9): 60-.
[2]	石伟,王朝立,陈建帅,侯许红. 基于图像处理的变电站指针式仪表读数研究[J]. , 2016, 29(1): 118-.