有源安装板振动试验研究

›› 2013, Vol. 26 ›› Issue (11): 129-.

有源安装板振动试验研究

王梅,张姗姗

(1.中国电子科技集团公司第38研究所工程技术部,安徽合肥 230031;2.合肥工业大学机械与汽车工程学院,安徽合肥 230009)

出版日期:2013-11-15 发布日期:2013-11-19
通讯作者: 张姗姗(1989—),女,硕士研究生。研究方向:数字化设计,虚拟装配与仿真。E-mail:857695238@qq.com
作者简介:王梅(1973—),女,工程师。研究方向:雷达天馈系统结构设计和有限元分析。
基金资助:
安徽省科技计划基金资助项目(10020203066)

Study on Vibration Experiment of Active Mounting Plate

WANG Mei,ZHANG Shanshan

(1.Engineering Department,No.38 Research Institute,China Electronic Technology Group Corporation,Hefei 230031,China;2.School of Mechanical and Automotive Engineering,Hefei University of Technology,Hefei 230009,China)

Online:2013-11-15 Published:2013-11-19

摘要/Abstract

摘要：

工作中的有源安装板处于振动状态,剧烈的振动会导致有源安装板结构的破坏,缩短有源安装板使用寿命,因此对有源安装板进行振动试验研究具有重要意义。文中针对某雷达有源安装板进行了振动试验,得到了X、Y、Z这3方向第一次与最后一次试验后的特征级曲线对比图,并最终分析了试验结果,且对有源安装板的结构设计进行了评估试验。

关键词: 振动试验, 有源安装板, 特征级, 结构设计

Abstract:

Active mounting plate is in the state of vibration when it is working.Violent vibration would cause structure damage of active mounting plate and shorten its service life.So it is important to conduct vibration test on active mounting plate.Test method is designed in this paper and the vibration experiment is done of a certain type of radar active mounting plate.The comparison charts of feature level curves in the directions of X,Y,Z between the first and last test are given.Test results are analyzed and the structure design of the active mounting plate is evaluated.

Key words: vibration test;active mounting plate;feature level;structure design;evaluate

中图分类号:

TP202+.1

王梅,张姗姗. 有源安装板振动试验研究[J]. , 2013, 26(11): 129-.

WANG Mei,ZHANG Shanshan. Study on Vibration Experiment of Active Mounting Plate[J]. , 2013, 26(11): 129-.

[1]	姜俊剑，杨丽红. 基于ADAMS的X光机俯仰机构设计仿真[J]. , 2017, 30(4): 107-.
[2]	吕景峰,权正宁. 某型航电模块的结构设计[J]. , 2013, 26(7): 144-.