›› 2013, Vol. 26 ›› Issue (9): 134-.

• 论文 • 上一篇    下一篇

基于ADSP-BF533的VGA显示控制器设计

吴子贤,孙昊,庞少龙   

  1. (西安电子科技大学 电子工程学院,陕西 西安 710071)
  • 出版日期:2013-09-15 发布日期:2013-09-25
  • 作者简介:吴子贤(1987—),女,硕士研究生。研究方向:电子设计自动化与嵌入式技术。E-mail:lf13722643156@163.com。孙昊(1988—),男,硕士研究生。研究方向:电子设计自动化与嵌入式技术。庞少龙(1988—),男,硕士研究生。研究方向:电子设计自动化与嵌入式技术。

Design of the VGA Display Controller Based on ADSP BF533

WU Zixian,SUN Hao,PANG Shaolong   

  1. (School of Electronic Engineering,Xidian University,Xi'an 710071,China)
  • Online:2013-09-15 Published:2013-09-25

摘要:

利用ADSP-BF533 及其外围电路实现了它与VGA的通信,可以将转化为数字信号的图像,通过VGA接口显示在CRT显示屏上。ADSP-BF533中主要采用TIMER和PPI接口。TIMER接口产生行同步和场同步信号,这两个信号的时序配置尤为重要,而TIMER接口在脉宽调制模式下,经过简单的配置就可以输出场同步信号和行同步信号。PPI接口主要是将图像转化成三原色信号进行输出。这两个口输出的数字信号再经过D/A转换就可以接到VGA接口上,经过验证,最终可将图像正确地显示在显示屏上。

关键词: ADSP BF533, VGA, TIMER接口, PPI接口

Abstract:

This paper take advantage of ADSP-BF533 and its circuit to communicate with VGA ,the image which is changed into digital signal can be displayed on CRT screen through VGA interface .TIMER interface and PPI interface play the most important role in the DSP.TIMER interface can be configured to generate row synchronizing signal and file synchronizing signal .Weather the two signals are correct is very critical ,The TIMER interface in the pulse with modulation mode can generate row synchronizing signal and file synchronizing signal after a simply configuration .The three primary color signals which the image converts into are output through PPI interface.The digital signals which are output through the two interfaces can be connected to VGA after D/A converting .The test shows that the image can be displayed on the screen.

Key words: ADSP BF533;VGA;TIMER interface;PPI interface

中图分类号: 

  • TN873