›› 2014, Vol. 27 ›› Issue (6): 35-.

• 论文 • 上一篇    下一篇

Ku波段80 W固态功率合成放大器的设计

张娟,湛婷,廖原,宋志东   

  1. (西安电子工程研究所 专业7部,陕西 西安 710100)
  • 出版日期:2014-06-15 发布日期:2014-06-14
  • 作者简介:张娟(1984—),女,工程师。研究方向:微波毫米波电路与系统。E-mail:522010773@qq.com。湛婷(1981—),女,工程师。研究方向:微波电路。廖原(1981—),男,工程师。研究方向:微波毫米波电路与系统。宋志东(1985—),男,工程师。研究方向:微波毫米波电路与系统。

Design of a Ku-band 80 W Solid-state Power Combining Amplifier

ZHANG Juan,ZHAN Ting,LIAO Yuan,SONG Zhidong   

  1. (Seventh Professional Division,Xi'an Electronic Engineering Research Institute,Xi'an 710100,China)
  • Online:2014-06-15 Published:2014-06-14

摘要:

利用波导电桥和微带双探针设计了一种Ku波段80 W固态功率放大器。波导电桥用于提高合成通道间的隔离度,波导-微带双探针则可提高模块集成度,从而实现了高密度集成下的大功率输出。该功率放大器在13.5~14.5 GHz频率范围内可实现80 W脉冲功率输出,且合成效率高于81%,附加效率高于25%。

关键词: 波导电桥, 波导-微带双探针, 固态功率放大器

Abstract:

This paper describes a Ku-band 80W solid-state power amplifier by using the waveguide bridge and waveguide-to-microstripe double probes transform structure.The waveguide bridge is used to improve the rejection rate between combination channels,and the waveguide-to-microstripe double probes transform structure can increases the integration of modules.Accordingly a higher power output is realized owing to the high dense integration.The pulse output power of this amplifier is 80W at 13.5~14.5 GHz with the corresponding power combining efficiency better than 81% and the power added efficiency greater than 25%.

Key words: waveguide bridge;waveguide to microstripe double probes;solid state power amplifier

中图分类号: 

  • TN722