›› 2014, Vol. 27 ›› Issue (8): 177-.

• 论文 • 上一篇    下一篇

瞬态目标红外探测电路设计

郑国平   

  1. (西安飞机工业公司职工工学院 综合处,陕西 西安 710089)
  • 出版日期:2014-08-15 发布日期:2014-07-21
  • 作者简介:郑国平(1956—),男,高级工程师。研究方向:信息检测与处理技术。E-mail:gaomuyou@126.com

Instantaneous Darget Using Circuit of Infrared Detection

ZHENG Guoping   

  1. (Comprehensive Department,Xi'an Aircraft Industrial Corporation Staff College of Engineering,Xi'an 710089,China)
  • Online:2014-08-15 Published:2014-07-21

摘要:

在靶场试验中,通常需要一个以弹丸出膛时刻为起始点的时间基准信号作为试验与测试的时间基准。文中分析了炮口火焰的红外光谱特性,设计了一种以锑化铟红外探测器为核心的炮口火焰探测系统。用锑化铟器件对瞬态目标的红外信号进行光电转换,采用暗电阻优化匹配来保证系统的探测灵敏度。所设计的差分阈值比较电路使系统在较强背景亮度下可准确地探测微弱目标信号,靶场实弹试验与测试表明,距离炮口50 m距离范围内系统所测时基信号精度达到1 μs,能满足靶场的试验需求。

关键词: 瞬态目标, 红外探测, InSb探测器, 阈值比较电路

Abstract:

In the range test,it often needs a projectile moment as the start time reference signal.The infrared spectral characteristic of the flare signal is analyzed in this paper,and the InSb infrared detector is used to design the muzzle triggering system.With indium antimonite device for transient target infrared signal by photoelectric conversion,the dark resistance matching method is adopted to improve the detection sensitivity of the system.Difference threshold processing method is put forward in this paper,and the weak target signals under strong background luminance brightness system can be detected accurately.Through the range test,in the range of 50 m,the timing precision of the detection system developed at 1 μs.

Key words: transient target;spectral characteristic of flare signal;InSb infrared detector;real-time response

中图分类号: 

  • TN215