›› 2017, Vol. 30 ›› Issue (4): 166-.

• 论文 • 上一篇    下一篇

火力发电系统中智能温控系统的设计与实现

江 霓,谭爱国   

  1. (上海理工大学 电工电子技术实验中心,上海 200093)
  • 出版日期:2017-04-15 发布日期:2017-04-11
  • 作者简介:江霓(1989-),女,硕士,助教。研究方向:智能电网中火发电设备的智能化控制等。谭爱国(1976-),女,副教授。研究方向:粒子群优化等。

Intelligent Temperature Control System in Thermal Power System Design and Implementation

JIANG Ni,TAN Aiguo   

  1. (Electrical and Electronic Technology Experiment Center,University of Shanghai for Science and Technology,Shanghai 200093,China)[
  • Online:2017-04-15 Published:2017-04-11

摘要:

针对锅炉中主蒸汽温度控制系统中具有的非线性、参数时变性和系统大滞后等问题,以LabVIEW为平台,采用数据采集卡PCI-8360V实现上位机与控制平台的通信,设计并实现了锅炉主蒸汽温度控制系统。采用PID、模糊PID以及模糊积分等算法控制锅炉主蒸汽温度, 同时通过数据采集卡获取这些数据, 在可视化界面上以趋势图的方式实时显示。结果表明,控制目标温度和实际仿真数据的误差缩小到2~3 ℃,能够满足在50%~100%负荷之间,蒸汽温度的变化范围被控制在要求的-10~+5 ℃。

关键词: 智能控制, LabVIEW, 锅炉主蒸汽温度控制, 模糊PID算法

Abstract:

For nonlinear, parameter time-varying and big lag system of boiler main steam temperature control system, based on the Labview platform, data acquisition card PCI - 8360 - v,which is adopted to realize communication of upper machine and control platform, boiler main steam temperature control system was designed and implemented.Adopted PID control, fuzzy PID and fuzzy integral algorithm to control boiler main steam temperature, at the same time through access to the data acquisition card to accomplish the visual interface real-time display in the form of trend chart.Results show that the control error of the target temperature and the actual simulation data reduced to 2~3 ℃, can satisfy the between 50% - 100% load, control the steam temperature range was - 10 ~ + 5 ℃ control requirements,with practical application value.

Key words: intelligent control, LabVIEW, boiler main steam temperature control, fuzzy PID algorithm

中图分类号: 

  • TM273