光纤激光器制备FeNiMoCoCrTi高熵合金过程与研究综述

doi:10.16180/j.cnki.issn1007-7820.2021.07.012

Abstract

Abstract:

As a new type of high-performance multi-primary alloy series, high-entropy alloy has broken through the traditional alloy category in terms of alloy principle, electronic theory and physical properties, and has the advantages of element addition and controllability of material physical properties. This study evaluates the technological design and physical innovation of high- entropy alloy preparation, focuses on laser cladding and orthogonal experiments for FeNiMoCoCrTi high entropy alloys. The corresponding solutions are proposed to deal with the limitations of the development of high entropy alloys and laser cladding technology, which provides guiding significance for the development of the application field, the research direction of laboratory and industrial production.

Key words: fiber laser, laser cladding, high entropy alloy, preparation process, process design, orthogonal test, research evaluation, robotization

CLC Number:

TN249

ZHANG Qi,LI Zhongwen,YU Zhishui. An Overview of the Process and Research on the Preparation of FeNiMoCoCrTi High Entropy Alloys by Fiber Laser[J].Electronic Science and Technology, 2021, 34(7): 67-72.

Figures/Tables 7

Figure 1.

Table 1.

Figure 2.

Figure 3.

Figure 4.

Figure 5.

Table 2.

References 23

[1]	Zhang Y, Lu Z P, Ma S G, et al. Guidelines in predicting phase formation of high-entropy alloys[J]. Mrs Communications, 2014,4(2):57-62. doi: 10.1557/mrc.2014.11
[2]	Zhang Y, Zuo T T, Tang Z, et al. Microstructures and properties of high-entropy alloys[J]. Progress in Materials Science, 2014,61(7):1-93. doi: 10.1016/j.pmatsci.2013.10.001
[3]	周航, 杨少锋, 杨亚楠, 等. 高熵合金的研究进展及发展趋势[J]. 热加工工艺, 2018,47(18):5-9.
	Zhou Hang, Yang Shaofeng, Yang Ya'nan, et al. Research progress and development trend of high entropy alloy[J]. Hot Working Technology, 2018,47(18):5-9.
[4]	王晓鹏, 孔凡涛. 高熵合金及其他高熵材料研究新进展[J]. 航空材料学报, 2019,39(6):1-19.
	Wang Xiaopeng, Kong Fantao. Resent development in high-entropy alloys and other high-entropy materials[J]. Journal of Aeronautical Materials, 2019,39(6):1-19.
[5]	褚延朋, 贾云柯, 李杰, 等. 高熵合金相转变规律的研究进展[J]. 金属热处理, 2019,44(11):19-24.
	Zhu Yanpeng, Jia Yunke, Li Jie, et al. Research progress of phase transformation law of high entropy alloys[J]. Heat Treatment of Metals, 2019,44(11):19-24.
[6]	王子玥, 郭敏, 于雪, 等. 退火对Al_1.5CrCuFeMnTi高熵合金组织和硬度的影响[J]. 稀有金属与硬质合金, 2019,47(2):15-21.
	Wang Ziyue, Guo Min, Yu Xue, et al. Effectof annealing on microstructures and hardness of Al_1.5CrCuFeMnTi high entropy alloy[J]. Rare Metals and Cemented Carbides, 2019,47(2):15-21.
[7]	刘宁, 仲浪, 陈晨, 等. FeCoNiMo₉₀Al₁₀高熵合金的高温抗氧化性[J]. 江苏科技大学学报(自然科学版), 2019,33(2):27-30.
	Liu Ning, Zhong Lang, Chen Chen, et al. High temperature oxidation behavior of FeCoNiMo₉₀Al₁₀high entropy alloy[J]. Journal of Jiangsu University of Science and Technology(Natural Science Edition), 2019,33(2):27-30.
[8]	许诠, 刘谦, 黄燕滨, 等. 高熵合金涂层的研究现状[J]. 电镀与涂饰, 2019,38(7):326-333.
	Xu Quan, Liu Qian, Huang Yanbin, et al. Current status of research on high-entropy alloy coatings[J]. Electroplating & Finishing, 2019,38(7):326-333.
[9]	王馨, 孙勇毅, 李荣斌, 等. Al_0.3CrFe_1.5MnNi_0.5高熵合金氮化物薄膜的微观结构及摩擦磨损性能研究[J]. 热加工工艺, 2015,44(12):174-177,181.
	Wang Xin, Sun Yongyi, Li Rongbin, et al. Structure and wear properties of Al_0.3CrFe_1.5MnNi_0.5 high entropy alloy nitride film[J]. Hot Working Technology, 2015,44(12):174-177,181.
[10]	Ren B, Liu Z X, Li D M, et al. Effect of elemental inter- action on microstructure of CuCrFeNiMn high entropy alloy system[J]. Journal of Alloy Compounds, 2010,503(2):148-153.
[11]	Zhou Y J, Zhang Y, Wang F J, et al. Effect of Cu addition on the microstructure and mechanical properties of AlCoCrFeNiTi_0.5 solid-solution alloy[J]. Jounral of Alloys and Compounds, 2008,46(6):201-204.
[12]	闫婷文, 谢东华, 陈志磊, 等. 真空电弧熔炼制备U₃Si₂块体及其杂质状态研究[J]. 真空科学与技术学报, 2019,39(5):441-446.
	Yan Tingwen, Xie Donghua, Chen Zhilei, et al. Major surface impurities of vacuum arc melted U₃Si₂ bulk material:an experimental study[J]. Chinese Journal of Vacuum Science and Technology, 2019,39(5):441-446.
[13]	Ren B, Liu Z X, Li D M, et al. Effect of elemental interaction on microstructure of CuCrFeNiMn high entropy alloy system[J]. Journal of Alloy Compounds, 2010,503(2):148-153.
[14]	刘岩, 朱辰, 张利明, 等. 相变直冷高功率光纤激光器[J]. 激光与红外, 2019,49(12):1425-1430.
	Liu Yan, Zhu Chen, Zhang Liming, et al. Phase change direct cooling high power fiber laser[J]. Laser & Infrared, 2019,49(12):1425-1430.
[15]	Wang D S, Tian Z J, Wang S L, et al. Preparation technology of nanometer ceramic particles reinforced metal-matrix graded coating by laser multi-layer cladding[J]. Applied Mechanics and Materials, 2012(217-219):1006-1009.
[16]	靳增高, 刘经惠, 毛红炀, 等. 被动锁模掺铥光纤激光器特殊形状脉冲的研究[J]. 光电子·激光, 2019,30(11):1123-1127.
	Jin Zenggao, Liu Jinghui, Mao Hongyang, et al. Experimental investigate in special shape pulses of passively mode-locked thulium-Doped fiber laser[J]. Journal of Optoelectronics·Laser, 2019,30(11):1123-1127.
[17]	秦书洋, 吴博, 李升, 等. 碳素结构钢钢渣改质后铸坯中大型夹杂物行为[J]. 钢铁钒钛, 2018,39(4):137-141.
	Qin Shuyang, Wu Bo, Li Sheng, et al. Research on large inclusion behavior of carbon structural steel before steel slag modified[J]. Iron Steel Vanadium Titanium, 2018,39(4):137-141.
[18]	曾晶, 任海兰. 基于自锁模的全光纤调Q激光器的设计[J]. 电子设计工程, 2016,24(20):75-77.
	Zeng Jing, Ren Hailan. Design of all-fiber Q-switch laser based on self-mode-locked[J]. Electronic Design Engineering, 2016,24(20):75-77.
[19]	王涛, 张健, 张娜, 等. 单晶光纤制备及单晶光纤激光器研究进展[J]. 激光与光电子学进展, 2019,56(17):159-170.
	Wang Tao, Zhang Jian, Zhang Na, et al. Research progress in preparation of single crystal fiber and fiber lasers[J]. Laser & Optoelectronics Progress, 2019,56(17):159-170.
[20]	张喆, 杨谦, 安亚强. 基于正交试验法的高性能混凝土耐久性能影响[J]. 粘接, 2019,40(12):133-135.
	Zhang Zhe, Yang Qian, An Yaqiang. Influence of high performance concrete durability based on orthogonal test method[J]. Adhesion, 2019,40(12):133-135.
[21]	陈硕, 汤琼, 彭智俊, 等. 基于正交试验法优化表贴式永磁同步电机永磁体[J]. 微特电机, 2019,47(10):36-38,41.
	Chen Shuo, Tang Qiong, Peng Zhijun, et al. Optimization of permanent magnet synchronous motor based on orthogonal experimental method[J]. Small & Special Electrical Machines, 2019,47(10):36-38,41
[22]	姜苹, 梁海波, 杨彬, 等. 基于正交试验法的故障诊断软件测试方法[J]. 计算技术与仿真技术, 2019,37(4):54-58.
	Jiang Ping, Liang Haibo, Yang Bin, et al. Testing method of fault diagnosis software based on orthogonal test method[J]. Aerospace Control, 2019,37(4):54-58.
[23]	吉佳红, 高尚. 基于正交试验的细菌觅食算法的全局最优化[J]. 电子设计工程, 2015,23(12):28-30.
	Ji Jiahong, Gao Shang. An bacterial foraging algorithm based on orthogonal experimental method for global optimization[J]. Electronic Design Engineering, 2015,23(12):28-30.

	Fe	Ni	Mo	Co	Cr	Ti
点阵类型	bcc	fcc	bcc	fcc	bcc	bcc
原子尺寸/mm	0.124	0.124	0.139	0.125	0.129	0.146
熔点/℃	1 535	1 455	2 633	1 495	1 857	1 660

An Overview of the Process and Research on the Preparation of FeNiMoCoCrTi High Entropy Alloys by Fiber Laser

RichHTML

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 7

References 23

Related Articles 3

Metrics

Comments

Recommended 10

[1]	XU Yangyang,SAN Hongjun,CHEN Jiupeng,XIE Feiya,WEI Shunxiang,WANG Wanglin,LIU Liang,CHEN Jia. Numerical Simulation Analysis of Temperature Field in LaserCladding of FL-DLight3-4000 Laser [J]. Electronic Science and Technology, 2021, 34(11): 1-10.
[2]	DING Yu, LI Zhong-Yin, CAI Qi-Zhong. Design of a Fiber Laser Power Control System [J]. , 2013, 26(2): 126-.
[3]	ZHOU Jian, ZHU Lian-Qing, ZHANG Yin-Min. Design of Pulse Fiber Laser Power Control System Based on FPGA [J]. , 2012, 25(12): 52-.

次序	1	2	3
1	1	1	1
2	2	2	1
3	1	2	2
4	2	1	2