基于STL模型的模具型腔分割算法研究及应用

doi:10.16180/j.cnki.issn1007-7820.2019.07.011

电子科技 ›› 2019, Vol. 32 ›› Issue (7): 56-60.doi: 10.16180/j.cnki.issn1007-7820.2019.07.011

基于STL模型的模具型腔分割算法研究及应用

吴展翔,甘屹,孙福佳

上海理工大学机械工程学院,上海 200093

收稿日期:2018-07-17 出版日期:2019-07-15 发布日期:2019-08-14
作者简介:吴展翔(1994-),男,硕士研究生。研究方向:预制建筑模具智能设计。|甘屹(1972-),男,博士,教授,博士生导师。研究方向:智能制造、图像处理。孙福佳(1978-) , 男, 讲师。研究方向:智能制造。|孙福佳(1978-) , 男, 讲师。研究方向:智能制造。
基金资助:
国家自然科学基金(51375314)

Research and Application of Mold Cavity Segmentation Algorithm Based on STL Model

WU Zhanxiang,GAN Yi,SUN Fujia

School of Mechanical Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China

Received:2018-07-17 Online:2019-07-15 Published:2019-08-14
Supported by:
National Natural Science Foundation of China(51375314)

摘要/Abstract

摘要：

文中以大型混凝土铸件为研究对象,针对人工设计多个模具部件时效率较低的问题,提出一种基于STL模型的型腔分割算法。通过改变STL模型三角面片的方向,将大型构件的STL模型转为模具型腔的STL模型。该算法将模具型腔STL模型数据分类,以三角形面片的法向矢量为判定条件,将同属一个型面的面片分类保存到同一个型面STL模型,从而将一个模具型腔的STL模型分为数个型面STL模型,实现了模具型腔的分割。最后通过两个典型案例中算法设计时间和人工设计时间的对比,证明该算法缩短了模具的设计时间,提高了效率,具有可行性。

关键词: 装配式建筑, 型腔, STL文件, 拓扑关系, 模具, 型腔分割算法

Abstract:

In this paper, a large concrete casting was taken as the research object, and a STL model based cavity segmentation algorithm was proposed to solve the problem of low efficiency of artificial design of multiple parts. By changing the direction of the triangular patch of the STL model, this paper transformed the STL model of the large component into the STL model of the mold cavity. This algorithm classified the mold cavity STL model data, and uses the normal vector of the triangular face as the judging condition. Then this algorithm classified the face slices of the same type surface to a same STL model. Thus, the STL model of a mold cavity was divided into several surface STL models, and the mold cavity was segmented. Finally, it was proved that the algorithm shortens the design time and improves the efficiency, and proved that the algorithm is feasible, by comparing the design time of two typical algorithms and the time of artificial design.

Key words: prefabricated construction, cavity, stereo lithography file, topological relation, mould, cavity segmentation algorithm

中图分类号:

TP312

吴展翔,甘屹,孙福佳. 基于STL模型的模具型腔分割算法研究及应用[J]. 电子科技, 2019, 32(7): 56-60.

WU Zhanxiang,GAN Yi,SUN Fujia. Research and Application of Mold Cavity Segmentation Algorithm Based on STL Model[J]. Electronic Science and Technology, 2019, 32(7): 56-60.

图/表 10

图1

图2

图3

图4

图5

图6

图7

图8

图9

表1

参考文献 17

[1]	Lu Xilin . Precast concrete structures in the future[J].Structural Concrete, 2014(15):1-2.
[2]	狄远德, 徐家连 . CAD/CAM在模具设计与加工中的关键技术[J]. 西安科技大学学报, 2014,34(1):115-118.
	Di Yuande, Xu Jialian . Key technology of CAD/CAM in mold design and processing[J]. Journal of Xi'an University of Science and Technology, 2014,34(1):115-118.
[3]	刘斌, 谭景焕 . 现代模具设计技术的现状及发展趋势[J]. 塑料工业, 2017,45(2):16-43.
	Liu Bin, Tan Jinghuan . The status and development trend of modern mold & die design[J]. Plastics Industry, 2017,45(2):16-23.
[4]	谢玲玲, 黄成林, 邵志保 , 等. 基于UG开发典型铝型材挤压模交互式参数化CAD系统[J]. 模具工业, 2017,43(1):18-21.
	Xie Lingling, Huang Chenglin, Shao Zhibao , et al. Interactive parametric CAD system of typical aluminium profiles extrusion die based on UG software[J]. Mould Industry, 2017,43(1):18-21.
[5]	李明亮, 刘平, 刘新宽 , 等. 铜合金连续挤压工艺及模具设计[J]. 锻压技术, 2014,39(11):39-42.
	Li Mingliang, Liu Ping, Liu Xinkuan , et al. Continuous extrusion process and mould design for copper alloy[J]. Forging and Stamping Technology, 2014,39(11):39-42.
[6]	Gonçalves N D, Carneiro O S, Nóbrega J M . Design of complex profile extrusion dies through numerical modeling[J]. Journal of Non-Newtonian Fluid Mechanics, 2013,200(20):103-110.
[7]	Wang Xudong, Yao Man . Optimization of oscillation model for slab continuous casting mould based on mould friction measurements in plant trial[J]. Journal of Iron and Steel Research, 2013,20(1):13-20.
[8]	盛红升, 徐敬华 . 基于邻接拓扑的STL模型3D打印分层算法研究与实现[D]. 杭州:浙江大学, 2018.
	Sheng Hongsheng, Xu Jinghua . Research and implementation of 3D printing hierarchical algorithm for STL model based on adjacency topology[D]. Hangzhou:Zhejiang University, 2018.
[9]	肖苏华 . 三维CAD实体文件转化STL文件格式精度研究[J].模具工业, 2014(9):12-14.
	Xiao Suhua . Three dimensional CAD entity file transformation STL file format accuracy research[J].Mold Industry, 2014(9):12-14.
[10]	沈惠平, 曾氢菲, 李菊 , 等. 典型并联机构拓扑结构特征分析[J]. 农业机械学报, 2016,47(8):388-398.
	Shen Huiping, Zeng Qingfei, Li Ju , et al. Analysis of topological characteristics of typical parallel mechanisms[J]. Journal of Agricultural Machinery, 2016,47(8):388-398.
[11]	王增波 . STL格式文件的快速拓扑重建算法[J]. 计算机应用, 2014,34(9):2720-2724.
	Wang Zengbo . Fast topology reconstruction algorithm for STL format files[J]. Computer Application, 2014,34(9):2720-2724.
[12]	黄长标, 刘斌, 江开勇 , 等. 基于边界分割的STL模型三维分段[J].机械科学与技术, 2014(6):870-874.
	Huang Changbiao, Liu Bin, Jiang Kaiyong , et al. STL model 3D segmentation based on boundary segmentation[J].Mechanical Science and Technology, 2014(6):870-874.
[13]	Shangguan H, Kang J, Deng C , et al. 3D-printed shell-truss sand mold for aluminum castings[J].Journal of Materials Processing Technology, 2017(3):250-256.
[14]	李玉鹏 . 虚拟现实技术在舞台机械监控系统中的应用[D]. 兰州:兰州理工大学, 2014.
	Li Yupeng . Application of virtual reality technology in stage machinery monitoring system[D]. Lanzhou:Lanzhou University of Technology, 2014.
[15]	王腾飞 . 3D打印技术中分层与路径规划算法的研究及实现[D]. 天津:河北工业大学, 2015.
	Wang Tengfei . Research and implementation of layering and path planning algorithm in 3D printing technology[D]. Tianjin:Hebei University of Technology, 2015.
[16]	周州, 张立成, 周林英 . 基于Open GL的桥梁3D可视化软件开发[J]. 电子科技, 2014,27(8):1-5.
	Zhou Zhou, Zhang Licheng, Zhou Linying . Development of bridge 3D visualization software based on Open GL[J]. Electronic Science and Technology, 2014,27(8):1-5.
[17]	徐杰, 丁学明 . 基于MATLAB与STM32的电机控制代码自动生成[J]. 电子科技, 2017,30(12):148-151.
	Xu Jie, Ding Xueming . Automatic generation of motor control code based on MATLAB and STM32[J]. Electronic Science and Technology, 2017,30(12):148-151.

	算法设计时间/h	人工设计时间/h
实例1	0.6	2.0
实例2	0.9	2.9
平均值	0.75	2.45

基于STL模型的模具型腔分割算法研究及应用

Research and Application of Mold Cavity Segmentation Algorithm Based on STL Model

RichHTML

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

图/表 10

参考文献 17

相关文章 13

Metrics

本文评价

推荐阅读 2

[1]	冯先丁,魏镜弢,吴张永,钱杰,浦友尚. 基于PCA-PSO-SVM的球磨机负荷预测研究[J]. 电子科技, 2022, 35(1): 29-34.
[2]	王庆文,胡海洋. 基于时序行为检测的工作流识别[J]. 电子科技, 2021, 34(8): 14-18.
[3]	王正军,姚一鸣,陈龙. 基于卷积神经网络的PCB板通用分拣算法[J]. 电子科技, 2020, 33(2): 60-65.
[4]	黄泰相,陈波,管鑫,程璐瑶. 基于电子搜索算法的电力系统无功优化[J]. 电子科技, 2019, 32(1): 58-61.
[5]	付鹏，沈莉莉. 基于源码模式挖掘的软件辅助开发技术研究[J]. , 2017, 30(4): 140-.
[6]	杨姗姗,王松会,宋东东. 基于回归分析的研究及R语言实现[J]. , 2015, 28(10): 186-.
[7]	邵雪飞. 基于Visual C++平台的信号采集分析系统[J]. , 2014, 27(5): 113-.
[8]	邵泽国. 语言科学发展的新分支——自然语言处理[J]. , 2013, 26(5): 166-.
[9]	路青起, 白燕燕. 基于双门限两级判决的语音端点检测方法[J]. , 2012, 25(1): 13-.
[10]	吴建涛, 房鼎益, 靳艳萍, 何路. 自然语言信息隐藏通用算法[J]. , 2011, 24(11): 115-.
[11]	毛磊, 陈锦. 基于三维重建的软组织面模型研究[J]. , 2010, 23(11): 16-18.
[12]	周殿凤. 基于FPGA的32位ALU软核设计[J]. , 2010, 23(11): 80-81.
[13]	张智文, 李琦, 张学龄, 宋田. 用Ansys APDL语言实现复杂边界条件的加载[J]. , 2010, 23(10): 95-97.