›› 2016, Vol. 29 ›› Issue (7): 113-.

• 论文 • 上一篇    下一篇

一种04 m机载平板动中通天线的设计

张瑞东,牛传峰   

  1. (中国电子科技集团公司第54研究所 天线伺服专业部,河北 石家庄 050081)
  • 出版日期:2016-07-15 发布日期:2016-07-15
  • 作者简介:张瑞东(1984-),男,硕士,工程师。研究方向:陈列天线。

Design of a 04 m Plate Antenna of Satcom on the Move

ZHANG Ruidong, NIU Chuanfeng   

  1. (Department of Antenna Servo,The 54th Research Institute of CETC,Shijiazhuang 050081,China)
  • Online:2016-07-15 Published:2016-07-15

摘要:

传统抛物面天线剖面高,而高速运动中的飞机需要具有低剖面特性的天线以减小其风阻。文中设计了一种Ku频段平板动中通天线,具有装机高度低、风阻小、性能优的特点。该天线阵列设计为35:1的长方形结构,大幅降低了高度。天线阵列采用高效率辐射单元,天线单元通过低损耗的带状线与波导结合形式馈电进行组阵。方位跟踪采用相控电子波束扫描技术,俯仰采用程序引导跟踪技术。测试结果表明,天线高度不超过280 mm,天线增益优于33 dB,跟踪精度误差控制在05 dB以内。

关键词: 动中通, 低剖面, Ku波段, 双极化, 平板天线

Abstract:

Traditional parabolic antenna has high profile, while high speed aircraft need low profile antenna to reduce the wind resistance. A kind of Ku band “Satcom on the Move” flat antenna is designed, which has the advantage of low profile, low wind resistance and good performance. The antenna array is designed to be a 35:1 ratio rectangle which can reduce antenna height. By using high efficiency radiation unit, the antenna array is connected with strip line and waveguide which have low insert loss. The phase controlled beam scanning technique is used for azimuth tracking and program tracking for elevation. The result shows that the antenna has a height of lower than 280mm, the antenna gain is better than 33dB, and then tracking accuracy is controlled in 05dB.

Key words: satcom on the move, low profile, Ku band, dual polarization, flat antenna

中图分类号: 

  • TN828.5