[1] |
汪镇国. 单相串激电机的原理设计制造[M]. 上海: 上海科学技术文献出版社, 2013.
|
|
Wang Zhenguo. The principle design and manufacture of single-phase series motor[M]. Shanghai: Shanghai Science and Technology Literature Press, 2013.
|
[2] |
吴松, 莫岳平, 周斌欣, 等. 串励直流电机新型控制方法的研究与设计[J]. 微特电机, 2015, 43(10):53-55.
|
|
Wu Song, Mo Yueping, Zhou Binxin, et al. Research and design of a new control method of series-wound DC machine[J]. Small & Special Electrical Machines, 2015, 43(10):53-55.
|
[3] |
Jerome C, Philippe V, Yvon C. A new structure of universal motor using soft magnetic composites[J]. IEEE Transactions on Industry Applications, 2004, 40(2):550-557.
doi: 10.1109/TIA.2004.824491
|
[4] |
黄其, 罗玲, 白娅梅, 等. 基于Magnet的深槽串励电动机设计[J]. 微特电机, 2012, 40(8):31-33.
|
|
Huang Qi, Luo Ling, Bai Yamei, et al. Design of deep slot universal motors based on Magnet[J]. Small & Special Electrical Machines, 2012, 40(8):31-33.
|
[5] |
黄其, 罗玲, 李小勇, 等. 一种低成本四极串励电动机的设计与分析[J]. 微特电机, 2013, 41(10):44-46.
|
|
Huang Qi, Luo Ling, Li Xiaoyong, et al. Design and analysis of a low cost four-poles universal motor[J]. Small & Special Electrical Machines, 2013, 40(10):44-46.
|
[6] |
Papa G, Benedic-Seljak B, Benedicic B, et al. Universal motor efficiency improvement using evolutionary optimization[J]. IEEE Transactions on Industrial Electronics, 2003, 50(3):602-611.
doi: 10.1109/TIE.2003.812455
|
[7] |
陈景华. 民用微电机原理设计[M]. 上海: 电子部21所微特电机编辑部, 1990.
|
|
Chen Jinghua. Principle design of civil micromotor[M]. Shanghai: Ministry of Electronic Industry,No.21 Institute,Micro Motor Editorial Department, 1990.
|
[8] |
汪国梁. 单相串激电动机[M]. 西安: 陕西科学技术出版社, 1980.
|
|
Wang Guoliang. Single-phase series motor[M]. Xi'an: Shaanxi Science and Technology Press, 1980.
|
[9] |
黄其, 罗玲, 张远. 改善串励电动机换向火花的设计方法[J]. 微特电机, 2014, 42(7):50-53.
|
|
Huang Qi, Luo Ling, Zhang Yuan. Design methods of reducing universal motors' commutation sparks[J]. Small & Special Electrical Machines, 2014, 42(7):50-53.
|
[10] |
金娟. 用于滚筒洗衣机的串激电机调速控制技术的研究[D]. 南京:南京理工大学, 2012.
|
|
Jin Juan. Research on speed control technology of universal motor used in washing machine[D]. Nanjing:Nanjing Universal of Science and Technology, 2012.
|
[11] |
Polat A, Ergene L T, Firat A. Dynamic modeling of the universal motor used in washer [C].Istanbul:International Aegean Conference on Electrical Machines and Power Electronics/Electromotion Joint Conference, 2011.
|
[12] |
Kurihara K, Sakamoto S. Stesdy-state and transient performance analysis for universal motors with appropriate turns ratio of lead coils to lag coils[J]. IEEE Transactions on Magnetics, 2008, 44(6):1506-1509.
doi: 10.1109/TMAG.2007.916406
|
[13] |
Kawase Y, Yamaguchi T, Sano S, et al. 3-D eddy current analysis in a silicon steel sheet of an interior permanent magnet motor[J]. IEEE Transactions on Magnetics, 2003, 39(3):1448-1451.
doi: 10.1109/TMAG.2003.810511
|
[14] |
庄晓龙. 单相串激电机的基本特性[J]. 电动工具, 2017(5):4-6.
|
|
Zhuang Xiaolong. The basic characteristics of single-phase series motor[J].Electric Tool, 2017(5):4-6.
|
[15] |
彭亦稰. 单相串励电动机电刷偏移角的计算[J]. 微电机, 1991(3):15-19.
|
|
Peng Yixu. The calculation on brush deviation angle of single-phase series motor[J]. Micromotors, 1991(3):15-19.
|
[16] |
赵博, 张洪亮. Ansoft12在工程电磁场中的应用[M]. 北京: 中国水利水电出版社, 2010.
|
|
Zhao Bo, Zhang Hongliang. Application of Ansoft12 in engineering electromagnetic field[M]. Beijing: China Water & Power Press, 2010.
|
[17] |
束东东, 刘伯玉, 王家珂, 等. 新型手持电钻机设计[J]. 机械工程与自动化, 2016(2):122-123.
|
|
Shu Dongdong, Liu Boyu, Wang Jiake, et al. Design of a new type of hand-held electric drill[J]. Mechnical Engineering & Automation, 2016(2):122-123.
|
[18] |
樊振华, 林献坤. 直线电机热误差动态建模与仿真分析[J]. 电子科技, 2016, 29(8):64-67.
|
|
Fan Zhenhua, Lin Xiankun. Dynamic modeling and simulation analysis of thermal deformation of linear motors[J]. Electronic Science and Technology, 2016, 29(8):64-67.
|
[19] |
吕凤吹, 罗选强, 王典. 电动工具性能曲线的分析[J]. 电动工具, 2014(2):1-4.
|
|
Lü Fengchui, Luo Xuanqiang, Wang Dian. Analysis of the electric tool performance curve[J]. Electric Tool, 2014(2):1-4.
|