[1] |
温若愚, 赵维一, 曾建 , 等. 卷烟叶丝加料工艺创新模式的探讨[J]. 河北农业科学, 2010,14(1):68-70.
|
|
Wen Ruoyu, Zhao Weiyi, Zeng Jian , et al. Discussion on process innovation mode of cut tobacco casing[J]. Journal of Hebei Agricultural Sciences, 2010,14(1):68-70.
|
[2] |
王栋梁 . 某烟草加香加料机的设计与仿真研究[D]. 南京:南京理工大学, 2011.
|
|
Wang Dongliao . Design and simulation of a tobacco flavoring feeder[D]. Nanjing:Nanjing University of Science and Technology, 2011.
|
[3] |
沈选举 . 管式干燥气固两相流的相似性原理及耦合数值模拟[D]. 昆明:昆明理工大学, 2005.
|
|
Shen Xuanju . Similarity principle and coupling numerical simulation of tubular dry gas-solid two-phase flow[D]. Kunming:Kunming University of Science and Technology, 2005.
|
[4] |
夏广瑜 . 关于减少烟草制造业制丝线叶片加料机滚筒粘附烟叶的研究[J]. 企业技术开发, 2010,29(8):51-52.
|
|
Xia Guangyu . Study on reducing adhesion of tobacco leaves by blades of feeder blades in tobacco industry[J]. Technological Development of Enterprise, 2010,29(8):51-52.
|
[5] |
归柯庭, 汪军, 王秋颖 . 工程流体力学[M]. 第2版.北京: 科学出版社, 2015.
|
|
Gui Keting, Wang Jun, Wang Qiuying. Engineering fluid mechanics[M].Second Edition. Beijing: Science Press, 2015.
|
[6] |
姚仁太, 郭栋鹏 . 计算流体力学基础与STAR-CD工程应用[M]. 北京: 国防工业出版社, 2015.
|
|
Yao Rentai, Guo Dongpeng. Computational fluid dynamics foundation and STAR-CD engineering[M]. Beijing: National Defense Industry Press, 2015.
|
[7] |
郝振华 . 粗糙颗粒动理学及流化床气化炉的数值模拟研究[D]. 哈尔滨:哈尔滨工业大学, 2011.
|
|
Hao Zhenhua . Kinetictheory of rough spheres and numerical simulation of fluiidzed bed gasifier[D]. Harbin:Harbin Institute of Technology, 2011.
|
[8] |
樊亚明, 翁国华, 岳坚 , 等. 基于Fluent的流场分析在稳压罐设计中的应用[J]. 电子科技, 2015,28(11):100-103.
|
|
Fan Yaming, Weng Guohua, Yue Jian , et al. Application of flow field analysis in the design of surge tank based on Fluent[J]. Electronic Science and Technology, 2015,28(11):100-103.
|
[9] |
赵智超, 岳坚, 赵龚 , 等. 流场仿真在水流量标准装置换向器设计中的应用[J]. 电子科技, 2017,30(1):100-103.
|
|
Zhao Zhichao, Yue Jian, Zhao Gong , et al. Application of CFD in the design of diverter for water flow standard device[J]. Electronic Science and Technology, 2017,30(1):100-103.
|
[10] |
李振中, 魏进家, 宇波 . 颗粒碰撞对槽道内气-粒两相湍流影响的数值研究[ C].西安:中国工程热物理学会2014年年会, 2014.
|
|
Li Zhenzhong, Wei Jinjia, Yu Bo . Numerical study on the effect of particle collision on gas-particle two-phase turbulence in a channel[C] .Xi’an:China Engineering Thermophysics Society 2014 Annual Meeting, 2014.
|
[11] |
Tomas Chacon Rebollo . Mathematicand numerical foundations of turbulence models and applications[M]. Basel:Birkhauser, 2014.
|
[12] |
Filippo Marchelli, Cristina Moliner, Barbara Bosio , et al. A CFD-DEM study of the behaviour of single-solid and binary mixtures in a pyramidal spouted bed[J]. Particuology, 2018,17(3):1-13.
|
[13] |
吴晅 . 气固两相穿越液池过程中的多相流动与传热传质[M]. 长春: 吉林大学出版社, 2016.
|
|
Wu Xuan. Multiphase flow and heat and mass transfer during gas-solid two-phase passage through a liquid pool [M]. Changchun: Jilin University Press, 2016.
|
[14] |
孙铭阳, 韦鲁滨, 朱学帅 , 等. 液固分选流化床内颗粒动力学方程的简化及应用[J]. 中南大学学报(自然科学版), 2018,49(6):1307-1314.
|
|
Sun Mingyang, Wei Lubin, Zhu Xueshuai , et al. Simplification and application of particles kinetic equation for liquid-solid fluidized bed separator[J]. Journal of Central South University(Science and Technology Edition), 2018,49(6):1307-1314.
|
[15] |
张慧玲, 庞宏波 . 地铁颗粒物在区间隧道内运动的受力特征分析[J]. 安全与环境学报, 2018,18(1):310-314.
|
|
Zhang Huiling, Pang Hongbo . Analysis of the forces acting on the subway particles moving along the underground tunnel[J]. Journal of Safety and Environment, 2018,18(1):310-314.
|
[16] |
宁智, 白振霄, 孙春华 , 等. 湍流通道内微粒受力沉降特性模拟[J]. 农业机械学报, 2014,45(12):1-8.
|
|
Ning Zhi, Bai Zhenxiao, Sun Chunhua , et al. Forces and deposition characteristics of particles in turbulent flow channel[J]. Journal of Transactions of the Chinese Society for Agricultural Machinery, 2014,12(1):1-8.
|