对大功率LED车灯芯片结温部分关键影响因素的研究

doi:10.16180/j.cnki.issn1007-7820.2019.03.015

Abstract

Abstract:

Due to the problem of high junction temperature during the lighting of LED lamp chips,two key factors affecting the junction temperature: distance between the light sources in the LED lamp chip and the spacing between the chips were studied in order to effectively reduce the junction temperature of the chip. This paper used ANSYS Workbench16.0 software for chip thermal simulation and verified the reliability of simulation results by the constant temperature test platform. The simulation results showed that properly setting the spacing between the internal light sources of the LED lamp chip could effectively reduce the chip junction temperature by 8.249℃ while appropriately increasing the spacing between LED lamp chips could also effectively reduce the junction temperature by 0.5℃.

Key words: junction temperature, LED lights, chip spacing, arrangement mode, light source spacing, tube pin temperature

CLC Number:

TN312.8

XIAO Yuanbin,YANG Ping. Research on the Partial Key Factors Affecting the Junction Temperature of High Power LED Lamp Chip[J].Electronic Science and Technology, 2019, 32(3): 72-76.

Figures/Tables 12

Figure 1.

Table1

Table2

Table3

Table4

Figure 2.

Table5

Figure 3.

Figure 4.

Figure 5.

Figure 6.

Table6

References 16

[1]	田仁飞, 杨春峰, 曹俊兴 , 等. OLED—新一代大型显示发光材料和技术[J]. 中国材料进展, 2015,34(10):716-717.
	Tian Renfei, Yang Chunfeng, Cao Junxing , et al. OLED-A new generation of large-scale display luminescent materials and technologies[J]. Chinese Material Progress, 2015,34(10):716-717
[2]	吴朝晖, 程浩, 章军 , 等. 大功率LED封装基板技术与发展现状[J]. 半导体光电, 2016,37(1):1-6.
	Wu Zhaohui, Cheng Hao, Zhang Jun , et al. High-power LED package substrate technology and development status[J]. Semiconductor Optoelectronics, 2016,37(1):1-6
[3]	韩敏, 叶正南, 施悦强 , 等. 适用于LED阵列光源的新型双层TIR透镜设计[J]. 电子科技, 2017,30(4):128-130.
	Han Min, Ye Zhengnan, Shi Yueqiang , et al. Design of a new double TIR lens for LED array light sources[J]. Electronic Science and Technology, 2017,30(4):128-130
[4]	王坤, 周连升, 翟晓磊 , 等. LED节能灯的应用现状和节能效果实证分析研究[J].资源节约与环保, 2016(4):70-71.
	Wang Kun, Zhou Liansheng, Zhai Xiaolei , et al. Empirical analysis and research on the application status and energy saving effect of LED energy-saving lamps [J]. Resource Conservation and Environmental Protection, 2016(4):70-71
[5]	戴文婷, 王亚刚, 蔡杰杰 . 基于物联网技术的LED灯光智能控制系统设计[J]. 电子科技, 2016,29(3):93-96.
	Dai Wenting, Wang Yagang, Cai Jiejie . LED lighting intelligent control system design based on internet of things technology[J]. Electronic Science and Technology, 2016,29(3):93-96
[6]	Wang J, Cai Y, Zhao X , et al. Thermal design and simulation of automotive headlamps using white LEDs[J]. Microelectronics Journal, 2014,45(2):249-255. doi: 10.1016/j.mejo.2013.11.011
[7]	Lai Y, Cordero N, Barthel F , et al. Liquid cooling of bright LEDs for automotive applications[J]. Applied Thermal Engineering, 2009,29(5-6):1239-1244. doi: 10.1016/j.applthermaleng.2008.06.023
[8]	Min W J, Jeon S W, Kim Y . Optimal thermal design of a horizontal fin heat sink with a modified-opening model mounted on an LED module[J]. Applied Thermal Engineering, 2015,91(7):105-115. doi: 10.1016/j.applthermaleng.2015.08.001
[9]	Peng H Y, Devarajan M, Lee T T , et al. Effects of ball bond diameter on wire bond reliability for automotive application[J]. Microelectronics International, 2016,33(1):53-60. doi: 10.1108/MI-02-2015-0020
[10]	Sung H K, Wang C, Kim N Y . Reliability study of Au-in solid-liquid interdiffusion bonding for GaN-based vertical LED packaging[J]. Journal of Micromechanics & Microengineering, 2015,25(12):127002-127023. doi: 10.1088/0960-1317/25/12/127002
[11]	Pecht M G, Chang M H . Failure mechanisms and reliability issues in LEDs[J].Solid State Lighting Technology & Application, 2013(1):43-110.
[12]	Min W J, Jeon S W, Kim Y . Optimal thermal design of a horizontal fin heat sink with a modified-opening model mounted on an LED module[J]. Applied Thermal Engineering, 2015,91(5):105-115. doi: 10.1016/j.applthermaleng.2015.08.001
[13]	Juntunen E, Tapaninen O, Sitomaniemi A , et al. Effect of phosphor encapsulant on the thermal resistance of a High-Power COB LED module[J]. IEEE Transactions on Components Packaging & Manufacturing Technology, 2013,3(7):1148-1154. doi: 10.1109/TCPMT.2013.2260796
[14]	郑奇 . LED汽车前照灯热管理技术研究[D]. 南京:南京理工大学, 2013.
	Zheng Qi . Research on LED automotive headlamp thermal management technology[D]. Nanjing:Nanjing University of Science and Technology, 2013.
[15]	Zhao X J, Cai Y X, Wang J , et al. Thermal model design and analysis of the high-power LED automotive headlight cooling device[J]. Applied Thermal Engineering, 2015,75(6):248-258. doi: 10.1016/j.applthermaleng.2014.09.066
[16]	赵梦雄 . LED汽车前照灯的应用研究[D]. 武汉:华中科技大学, 2013.
	Zhao Mengxiong . Research on application of LED automotive headlamp[D]. Wuhan:Huazhong University of Science and Technology, 2013.

	L_n			Z-P_m
编号	L₁	L₂	L₃	Z-P₁	Z-P₂	Z-P₃
间距值/mm	0	1	2	0	10	20

名称	材料	热导率/W·(m·k)^-1
热沉	铝	237.5
陶瓷	氧化铝(Al₂O₃)	35
荧光粉	硅树脂	0.17
芯片	氮化镓GaN	130
粘结层	合金焊料(Au₈₀Sn₂₀)	57

芯片间距P_m/mm	0	10	20
Z-M结温/℃	93.108	92.963	92.653
Z-R结温/℃	92.854	92.715	92.436

芯片间排布间距/mm		0	10	20
	Z-P_m-M	85.45	84.65	84.1
实验芯片结温/℃	Z-P_m-R	84.75	84.5	84.3
	L₁	69.2	/	/
	Z-P_m-M	93.058	92.963	92.653
仿真芯片结温/℃	Z-P_m-R	92.854	92.715	92.436
	L₁	75.513	/	/

Research on the Partial Key Factors Affecting the Junction Temperature of High Power LED Lamp Chip

RichHTML

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 12

References 16

Related Articles 3

Metrics

Comments

Recommended 10

[1]	ZHANG Jie,ZENG Guohui,HUANG Bo. The Loss Calculation and Analysis of Hybrid Modular Multilevel Converter Considering Sub-Module Balancing Constraint [J]. Electronic Science and Technology, 2021, 34(8): 71-78.
[2]	ZHUANG Liangqian,XIAO Zhihong,SHEN Jun. Design of Intelligent Multi-band LED Insects Trapping System Based on Micro Control Unit [J]. , 2014, 27(6): 134-.
[3]	ZHANG Ting,WANG Junyong,ZHANG Li,LI Bao,LIU Xingsheng. Design of the Intelligent Multi-input High Power LED Driver Circuit [J]. , 2014, 27(4): 60-.