[1] |
楼才义, 徐建良, 杨小牛 . 软件无线电原理与应用[M]. 北京: 电子工业出版社, 2014.
|
|
Lou Caiyi, Xu Jianliang, Yang Xiaoniu. Soft-defined radio: principles and practice[M]. Beijing: Publishing House of Electronics Industry, 2014.
|
[2] |
潘乐 . 中频信号处理模块在可重构平台中的设计与实现[D]. 成都:电子科技大学, 2015.
|
|
Pan Le . Research on marching-on in-time scheme and the fast algorithm of time domain integral equation[D]. Chengdu: University of Electronic Science and Technology of China, 2015.
|
[3] |
娄欣欣 . 可重构软件无线电平台的设计与实现[D]. 西安: 长安大学, 2016.
|
|
Lou Xinxin . The design and implementation of reconfigurable software radio platform[D]. Xi’an:Chang’an University, 2016.
|
[4] |
李明全 . 新一代无线通信统一平台的软件可重构研究[D]. 重庆:重庆大学, 2009.
|
|
Li Mingquan . The software reconfiguration research of the new generation wireless communication system[D]. Chongqing: Chongqing University, 2009.
|
[5] |
张帆 . 可重构软件平台构建原理与应用研究[D]. 武汉: 武汉理工大学, 2012.
|
|
Zhang Fan . Research on the construction theory of a reconfigurable software platform and its application[D]. Wuhan:Wuhan University of Technology, 2012.
|
[6] |
贾明权 . 大型可重构信号处理系统建模技术[J]. 电子技术, 2017(13):125-126.
|
|
Jia Mingquan . Large reconfigurable signal processing system modeling technology[J]. Electronic Technique, 2017(13):125-126.
|
[7] |
孙彬 . 组件化信号处理平台应用框架设计与实现[D]. 郑州:信息工程大学, 2016.
|
|
Sun Bin . Design and implementation of an application framework for component-based signal processing platform[D]. Zhengzhou:Information Engineering University, 2016.
|
[8] |
李丹丹 . 基于GNU Radio平台包络平方谱码元速率估计模块[J]. 电子科技, 2017,30(8):146-149.
|
|
Li Dandan . Module of envelope square spectrum to estimation signal symbol rate based on GNU radio platform[J]. Electronic Science and Technology, 2017,30(8):146-149.
|
[9] |
赵爽 . 应用与无线通信基带算法的可重构平台及典型算法实现[D]. 上海:复旦大学, 2010.
|
|
Zhao Shuang . Research and design of reconfigurable basedband platform for wireless communication with typical algorithma implementation[D]. Shanghai:Fudan University, 2010.
|
[10] |
张嘉铭 . 可重构终端调制解调分层模型实现技术的研究[D]. 哈尔滨:哈尔滨工业大学, 2011.
|
|
Zhang Jiaming . Implementation technology research on modulation and demodulation of reconfigurable terminal based on layered model[D]. Harbin: Harbin Institute of Technology, 2011.
|
[11] |
吴飞 . 智能可重构终端调制方式实现技术的研究[D]. 哈尔滨:哈尔滨工业大学, 2014.
|
|
Wu Fei . Implementation technology research on modulation mode of intelligent reconfigurable terminal[D]. Harbin: Harbin Institute of Technology, 2014.
|
[12] |
Martin Fowler. 重构:改善既有代码的设计[M]. 熊节, 译.北京:人民邮电出版社, 2015.
|
|
Martin Fowler. Refactoring,Improving the design of existing code[M]. Xiong Jie, Translator.Beijing:Posts and Telecom Press, 2015.
|
[13] |
Beck Kent . Make it run, make it right: design through refactoring[M]. NewYork:SIGS Publications Inc., 1997.
|
[14] |
邓绍芳 . 组件技术在软件开发中的应用研究[D]. 成都: 西南交通大学, 2001.
|
|
Deng Shaofang . Component technology application in software development research[D]. Chengdu:Southwest Jiaotong University, 2001.
|
[15] |
Tracz W. Implementation working group summary[C]. Pittsburgh:Reuse in Practice Workshop, 1989.
|
[16] |
杜勇 . 数字通信同步技术的MATLAB与FPGA实现[M]. 北京: 电子工业出版社, 2015.
|
|
Du Yong. Digital communication synchronization technology of MATLAB and FPGA implementation[M]. Beijing: Publishing House of Electronics Industry, 2015.
|
[17] |
马娅娜 . 基于FPGA的QAM调制解调技术研究[D]. 西安: 西安电子科技大学, 2007.
|
|
Ma Yana . QAM modulation and demodulation technology research based on FPGA[D]. Xi’an:Xidian University, 2007.
|
[18] |
朱雪阳 . 基于Gardner算法的位定时同步研究[D]. 南京: 南京理工大学, 2010.
|
|
Zhu Xueyang . A timing synchronization based on Gardner algorithm research[D]. Nanjing:Nanjing University of Science and Technology, 2010.
|