›› 2013, Vol. 26 ›› Issue (9): 124-.
• Articles • Previous Articles Next Articles
WU Qianke,CHEN Guoqing
Online:
Published:
Abstract:
Since it is easy for an FPGA device based on SRAM technology to lose data when it is powered off,in some engineering systems the use of passive configuration is required.This article takes Altera EP4CE6 as an example,using the microcontroller and adopting the mode of FPGA PS configuration on electrical load and remote loaded,which is applied to the display in the remote control system.Practice shows that this solution is simple,reliable and low in cost.
Key words: FPGA;MCU;remoteloaded;PS
CLC Number:
WU Qianke,CHEN Guoqing. Application of the FPGA PS Configured in the Display System[J]., 2013, 26(9): 124-.
0 / / Recommend
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
URL: https://journal.xidian.edu.cn/dzkj/EN/
https://journal.xidian.edu.cn/dzkj/EN/Y2013/V26/I9/124
[1]薛昀,李宗艳,张德安.基于单片机的FPGA被动串行配置方式[J].桂林电子工业学院学报,2005(3):29-32.
[2]胡启道,张福洪,戴绍港.基于MCU的FPGA在线配置[J].电子器件,2007(3):1049-1051.
[3]Altera公司.Cyclone device handbook[EB/OL].(2013-03-01)[2013-03-12]http://www.pudn.com/downloads193/ebook/deta.
[4]徐维祥,刘旭敏.单片微型机原理及应用[M].大连:大连理工大学出版社,1996.
[5]胡修林,席向清,张蕴玉.嵌入式系统中FPGA的被动串行配置方式[J].单片机与嵌入式系统应用,2004(3):21-23.
Cited