基于Fluent的电机温度场计算

doi:10.16180/j.cnki.issn1007-7820.2021.12.006

Abstract

Abstract:

The calculation of motor temperature field is an essential part of motor design. The temperature rise of motor is related to the safety and stability of the whole system and related equipment. According to the parameters of the motor, the electromagnetic model of the motor is established to calculate the loss, and the loss is loaded into the two-dimensional model in the form of heat source density to calculate the motor temperature field. In order to improve the accuracy of temperature rise calculation, the equivalent thermal conductivity method is used to process the heat exchange in the air gap of the motor according to the structure characteristics of the moto. The accuracy of the equivalent thermal conductivity method is verified by comparing the simulation results with the experimental data. Fluent software is adopted to solve the two-dimensional temperature field model in a unidirectional coupling way. Finally, the temperature field data obtained by the experiment is compared with the simulation calculation results to verify the accuracy of the two-dimensional model to calculate the steady-state temperature field of the experimental motor.

Key words: temperature field, loss, heat source density, two dimensional, electromagnetic, air gap, equivalent thermal conductivity, Fluent

CLC Number:

TP391.9

FANG Xin,WU Yaohui,WU Haozhen. Calculation of Motor Temperature Field Based on Fluent[J].Electronic Science and Technology, 2021, 34(12): 30-35.

Figures/Tables 17

Table 1

Figure 1.

Table 2

Figure 2.

Figure 3.

Table 3

Table 4

Figure 4.

Figure 5.

Figure 6.

Figure 7.

Figure 8.

Figure 9.

Table 5

Figure 10.

Figure 11.

Figure 12.

References 19

[1]	魏永田, 孟大伟, 温嘉斌. 电机内热交换[M]. 北京: 机械工业出版社, 1998.
	Wei Yongtian, Meng Dawei, Wen Jiabin. Heat exchange in motor[M]. Beijing: China Machine Press, 1998.
[2]	汤蕴璆, 罗应立, 梁艳萍. 电机学[M]. 北京: 机械工业出版社, 2014.
	Tang Yunqiu, Luo Yingli, Liang Yanping. Electric machinery[M]. Beijing: China Machine Press, 2014.
[3]	杨世铭, 陶文铨. 传热学[M].4版. 北京: 高等教育出版社, 2006.
	Yang Shiming, Tao Wenquan. Heat transfer[M].4th ed. Beijing: Higher Education Press, 2006.
[4]	宋守许, 胡孟成, 杜毅, 等. 混合定子铁心再制造电机三维温度场分析[J]. 电机与控制学报, 2020, 24(6):33-42.
	Song Shouxu, Hu Mengcheng, Du Yi, et al. Temperature field investigation of remanufacturing motor with mixed stator core[J]. Electric Machines and Control, 2020, 24(6):33-42.
[5]	吴家成, 张炳义. 皮带输送机用外转子永磁同步电机温度场研究[J]. 防爆电机, 2020, 55(2):8-12.
	Wu Jiacheng, Zhang Bingyi. Temperature field study on external rotor PMSM for belt conveyor[J]. Explosion-Proof Electric Machine, 2020, 55(2):8-12.
[6]	周晓燕, 孙立翔, 王金平. 基于等效热网络法的永磁同步电机温升计算[J]. 微电机, 2019, 52(11):21-26.
	Zhou Xiaoyan, Sun Lixiang, Wang Jinping. Temperature rise calculation of permanent magnet synchronous motor based on equivalent heat network method[J]. Micromotors, 2019, 52(11):21-26.
[7]	曹梦楠, 邱颖宁, 冯延晖, 等. 基于等效热网络法的风力发电机故障诊断[J]. 工程热物理学报, 2019, 40(2):206-313.
	Cao Mengnan, Qiu Yingning, Feng Yanhui, et al. Fault diagnosis of wind generator based on equivalent thermal network method[J]. Journal of Engineering Thermophysics, 2019, 40(2):206-313.
[8]	宋贺, 吴尧辉, 吴昊珍. 基于多场耦合的电机暂态温度场研究[J]. 电子科技, 2020, 33(5):15-20.
	Song He, Wu Yaohui, Wu Haozhen. Research on transient temperature field of motor based on multifield coupling[J]. Electronic Science and technology, 2020, 33(5):15-20.
[9]	张勇. 永磁同步电机多物理场及电磁参数优化研究[D]. 郑州:郑州轻工业大学, 2020.
	Zhang Yong. Research on the multi-physical fields and electromagnetic parameters optimization of permanent magnet synchronous motor[D]. Zhengzhou:Zhengzhou University of Light Industry, 2020.
[10]	杨文豪, 周志刚, 李争争. 油冷温度与流速对轮毂电机温度场研究[J]. 微电机, 2020, 53(1):31-34.
	Yang Wenhao, Zhou Zhigang, Li Zhengzheng. Research on temperature field of hub motor by oil cooling temperature and flow velocity[J]. Micromotors, 2020, 53(1):31-34.
[11]	杨震, 丁涛, 郭媛. 绕线式异步电机三维温度场仿真分析[J]. 微特电机, 2019, 47(6):6-9.
	Yang Zhen, Ding Tao, Guo Yuan. Simulation analysis of 3D thermal field of windings rotor asynchronous motor[J]. Small & Special Electrical Machines, 2019, 47(6):6-9.
[12]	史忠震, 许贞俊, 张宇. 基于ANSYS 永磁无刷电动机的温度场分析[J]. 微特电机, 2017, 45(10):31-33.
	Shi Zhongzhen, Xu Zhenjun, Zhang Yu. The temperature field analysis of permanent magnet brushless motor based on ANSYS[J]. Small & Special Electrical Machines, 2017, 45(10):31-33.
[13]	丁树业, 朱敏, 江欣. 永磁同步电机三维全域温度场与温度应力耦合研究[J]. 电机与控制学报, 2018, 22(1):53-60.
	Ding Shuye, Zhu Min, Jiang Xin. Coupling study of 3D universal temperature field and temperature stress for permanent magnet synchronous motor[J]. Electric Machines and Control, 2018, 22(1):53-59.
[14]	王琳. 离心机用高速永磁同步电机温度场及水冷分析[D]. 湘潭:湘潭大学, 2018.
	Wang Lin. Analysis of temperature field and water cooling of high speed permanent magnet synchronous motor for centrifuge[D]. Xiangtan:Xiangtan University, 2018.
[15]	陈明. 电动汽车用磁通切换永磁电机冷却系统设计与分析[D]. 南京:东南大学, 2018.
	Chen Ming. Design and analysis of cooling system for a flux-switching permanent magnet machine in electric vehicles[D]. Nanjing:Southeast University, 2018.
[16]	陈起旭, 王云洪, 杨来顺, 等. 铜转子三相异步电动机温度场流场固耦合分[J]. 电机与控制应用, 2017, 44(10):77-82.
	Chen Qixu, Wang Yunhong, Yang Laishun, et al. Temperature-Fluid field coupling analysis of three phase asynchronous motor with copper rotor[J]. Electric Machines & Control Application, 2017, 44(10):77-82.
[17]	孟大伟, 刘瑜, 徐永明. 潜油电机转子三维温度场分析与计算[J]. 电机与控制学报, 2009, 13(3):367-370.
	Meng Dawei, Liu Yu, Xu Yongming. Analysis and calculation of 3D temperature field of submersible motor rotor[J]. Electric Machines and Control, 2009, 13(3):367-370.
[18]	段中喆. ANSYS FLUENT 流体分析与工程实力[M]. 北京: 电子工业出版社, 2015.
	Duan Zhongzhe. ANSYS FLUENT fluid analysis and engineering example[M]. Beijing:Publishing House of Electronics Industry, 2015.
[19]	徐晓文, 聂芸. 基于温度场的气象时空数据功态可视化[J]. 电子设计工程, 2018, 26(20):159-164.
	Xu Xiaowen, Nie Yun. Dynanic visualization of meteorlogical spatiotemporal date based on temperature field[J]. Electronic Design Engineering, 2018, 26(20):159-164.

电机参数	数值	电机参数	数值
额定功率/W	100	额定电压/V	220
额定电流/A	0.5	额定转速/r·min^-1	1 420
定子槽	24	转子槽	30
极对数	2	外壳外径/mm	140
铁心长度/mm	50	气隙长度/mm	0.18
定子外径/mm	120	转子外径/mm	70.8

电机部位	损耗值/W	热源密度/W·m^-3
定子铜耗	12.07	103 018
转子铜耗	8.58	205 755
定子铁耗	3.73	14 401
转子铁耗	0.20	1 408

	节点数	网格数
二维模型	94 327	42 698
三维模型	8 135 716	9 258 906

电机部位	材料	导热系数 /W·m^-1·K^-1	比热容 /J·kg^-1·K^-1	密度 /kg·m^-3
定转子铁芯	DR510-50	42.500	450.0	7 600.00
定子绕组	铜、绝缘	0.300	383.1	11 595.43
转子导条	铝	200.000	896.0	5 007.95
转轴	Q235钢	80.000	480.0	33 709.00
外壳	铸铝	200.000	896.0	8 391.00
气隙	空气	0.026	1 005.6	1.20

	外壳	绕组中部	定子轭部	转子
实验温度/℃	54.0	58.3	55.8	61.4
仿真温度/℃	50.7	53.8	52.2	58.5

Calculation of Motor Temperature Field Based on Fluent

RichHTML

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 17

References 19

Related Articles 15

Metrics

Comments

Recommended 10

[1]	CHEN Zhenghong,JIANG Yuanzhen,HOU Jianqiang. A Large-Scale Antenna Array Radome Decoupling Technology Based on Electromagnetic Metamaterials [J]. Electronic Science and Technology, 2022, 35(1): 6-11.
[2]	XIU Xiaobo,LI Boquan,ZHOU Feng. Optimization of Temperature Sensor Location Based on Genetic Algorithm [J]. Electronic Science and Technology, 2021, 34(9): 17-23.
[3]	ZHAO Chong,CHI Mengmeng,CHU Cong,ZHANG Peng. Research on Motion Simulation and Visual Recognition Algorithm of Guide Dog Walking Mechanism [J]. Electronic Science and Technology, 2021, 34(9): 66-72.
[4]	ZHANG Jie,ZENG Guohui,HUANG Bo. The Loss Calculation and Analysis of Hybrid Modular Multilevel Converter Considering Sub-Module Balancing Constraint [J]. Electronic Science and Technology, 2021, 34(8): 71-78.
[5]	ZHAN Yinwei,ZHU Baiwan,YANG Zhuo. Research and Application of Vehicle Face Recognition Algorithm [J]. Electronic Science and Technology, 2021, 34(8): 1-7.
[6]	HUANG Yuecheng,TONG Dongbing. Event-Based Fault Detection Filter with Packet Loss and Time-Varying Delay [J]. Electronic Science and Technology, 2021, 34(7): 7-12.
[7]	FANG Xin,WU Yaohui,SONG He. Electromagnetic Simulation Analysis of Asynchronous Motor Starting [J]. Electronic Science and Technology, 2021, 34(6): 61-66.
[8]	WU Qilin,TAN Kangbo,LU Hongmin. Analysis of Coupling Characteristics of Microstrip Line on PCB inside Portable Chassis [J]. Electronic Science and Technology, 2021, 34(3): 1-5.
[9]	HE Yue,ZHANG Jianhua,CHEN Yan,HAN Chunyong,SHI Yunlei,SHAO E. Study on Radiation Response Characteristics of Internal Cables of Frequency Equipment [J]. Electronic Science and Technology, 2021, 34(3): 18-21.
[10]	PENG Xinglai,LI Zheng. Comparative Analysis of Performance of Electric Excitation Concentrated Winding Motor [J]. Electronic Science and Technology, 2021, 34(12): 19-24.
[11]	FANG Lingli,XIAO Longfei,BI Chao. Electromagnetic Structure Optimization of Three-Phase Hybrid Stepping Motor Based on Taguchi Method [J]. Electronic Science and Technology, 2021, 34(12): 7-12.
[12]	XU Yangyang,SAN Hongjun,CHEN Jiupeng,XIE Feiya,WEI Shunxiang,WANG Wanglin,LIU Liang,CHEN Jia. Numerical Simulation Analysis of Temperature Field in LaserCladding of FL-DLight3-4000 Laser [J]. Electronic Science and Technology, 2021, 34(11): 1-10.
[13]	WU Chunxiang,ZHONG Chonggui. First Principles Research Progress of Two Dimensional Ferroelectric Materials [J]. Electronic Science and Technology, 2021, 34(10): 81-86.
[14]	CHEN Shengli,WANG Xinzhang,XU Xiaozhuo. Electromagnetic Simulation Analysis of Permanent Magnet Synchronous Motor Demagnetization Fault [J]. Electronic Science and Technology, 2021, 34(10): 32-37.
[15]	WANG Xinzhang,GUO Qiang,XU Xiaozhuo. The Analysis of Field Changes for Induction Motor with Broken End Rings [J]. Electronic Science and Technology, 2021, 34(10): 18-26.